Philips 60PL9200D To select connected devices and audio and video functions, Using Spdif

7Audio to Hi-Fi System (Digital)

Using SPDIF

A	Connect audio cable from the SPDIF jack on the rear of the TV to the
	DIGITAL IN jack on the rear of the hi-fi system.

Tip:SPDIF (Sony and Philips Digital Interconnect Format) is highly recommended for high quality digital sound output.

To select connected devices and audio and video functions

Select Connected Devices

& Press the AV button repeatedly or select Source in the Settings menu (see p. 13) to select the connected devices' channels: AV1, AV2, AV3, HDMI, Side or TV, according to where you connected your devices.

é Press the cursor up/down button.

“ Press OK button.

Select audio and video functions

Most of the audio and video equipment from Philips' range of products can be operated with the remote control of your TV.

Press one of the buttons after you pressed the SELECT button repeatedly according to the equipment you want to operate with this remote control. See Use of the remote control, p. 5.

When no action is taken within 60 seconds, the remote control goes back to TV mode.

POWER to switch to standby

Δfor pause,

·for record,

¢for rewind (VCR, CD); search down (DVD, AMP)

Êfor stop,

Æfor play,

∫for fast forward (VCR, CD); search up (DVD/AMP)

INFO display information

MENU to switch the menu on or off

-CH + for chapter, channel, track selection

0 to 9 digit entry,

-tape index (VCR), select a DVD chapter, select a frequency (AMP)

cursor up/down

to select the next or the previous disc (CD)

cursor left/right

to select the previous or following track (CD)

Notes:

-If no action is being undertaken within 60 seconds, the remote control returns to TV mode.

-After an action in the selected system mode, the remote control will remain in this mode for 60 seconds and will then return to TV mode or press the SELECT button to return to TV mode immediately.

24