Philips 60PL9200D Menu preferences, Reset AV settings, On Screen display, Set/Change PIN

Settings Setup
Preferences			4		Menu preferences			3
Picture/sound prefere...					OSD
Features preferences					Show emergency al...
Menu preferences					Change PIN
Reset AV	settings
		Settings			Setup Preferences
		Preferences				3	OSD		2
		OSD					Normal
		Show emergency alerts					Minimum
This menu allows you to setup or to select some menu
		Change PIN
related setting preferences.
	You can select the display of the volume bar and a reduced or an
	extended on screen display of program and channel information.
Settings Setup Preferences
Menu preferences			3	Show emergency al... 3
OSD					Always
Show emergency alerts					Skip low priority
Change PIN					Skip medium/low pri...
You can select the display of the volume bar and a reduced or an
extended on screen display of program and channel information.

Tips:

Emergency Alert Signalling is not possible:

-when content browsing;

-with analogue video sources.

-You always have the possibility to remove the message from the screen.

-The message display will overlap whatever menu element or other message is on the screen.

Caution! If you have forgotten your PIN!

&Select Change PIN in the Menu preferences menu and press the cursor right.

éPress the cursor right to enter the overriding PIN code 0-7-1-1.

“Press the cursor again and enter a new personal 4-digit PIN code.The previous code is erased and the new PIN- code is stored.

Settings Setup

Preferences	4	Reset AV settings
Picture/sound prefere...
Features preferences		Start now
Menu preferences
Reset AV settings

This resets the picture and sound settings to their predefined factory values, but maintains the channel installation settings.

Menu preferences

On Screen display

&Select OSD.

éPress the cursor right button to select Normal or Minimum.

Normal to activate the continuous display of the channel number (for max. 10 minutes) and extended display of TV channel and program information on screen. E.g. information on the main or auxiliary program, input signal quality of connected accessory devices, the display format, sound mode, availability of Closed Caption service, the audio language, the rating, sleeptimer setup.

Minimum to activate the display of reduced channel information. Note:When Closed Captions is turned on, continuous display of the channel number and clock is not possible.

Show emergency alerts (EAS)

This allows you to select the alert priority level of the information disseminated by the cable operator.The standard SCTE18 defines an Emergency Alert signalling method for use by cable TV systems to signal emergencies to digital devices such as digital set-top boxes, digital TVs and digital VCRs.

The Emergency alert signalling scheme defined in the standard allows a cable operator to disseminate emergency alert information related to state and local-level emergencies and warnings in a cost-effective and efficient way, while minimizing disruption of programming.

An Emergency alert message will have one of the following priorities: Low, Medium, High or Maximum.

The Emergency alert message with priority High or Maximum will always be presented. Low or Medium will be present or ignored depending on the selected setting.

Caution! When the TV clock is undefined (See section on Clock), the Emergency Alerts will be ignored.

The Emergency Alert message display will contain following information:

-The Emergency Alert text

-The start time + date

-The end time + date.

&Select Show Emergency Alerts in the Menu preferences menu.

éPress the cursor right button and select one of the Emergency alerts options:

-Always, when you always want the Emergency alert messages to be displayed when available;

-Skip low priority, when you want the messages with low level to be ignored;

-Skip low/medium priority, when you only want the messages with high priority to be displayed.

Set/Change PIN

&Select Set or Change PIN with the cursor down button.

éIf no PIN-code exists, the menu item is set to Set PIN. Follow the instructions on screen.

If a PIN-code has previously been entered, the menu item is set to Change PIN. Follow the instructions on screen.

All number combinations from 0000 to 9999 are valid numbers.

“The Menu preferences menu reappears with a message confirming that the PIN has been created.

Reset AV settings

This function allows you to reset most of the picture and sound settings to their predefined factory states.

&Select Reset AV settings with the cursor down button.

éPress the cursor right button.

“Press OK button to erase settings and reset them to their default values.-

12