4.2 For UHF reception | 9 |
1Turn your TV to the desired channel.
2 Turn on the amplifier by rotating the UHF gain control knob towards the max position until reception is improved. 9
D Note
You may need to turn the gain control down to a lower setting for best reception.
3
Position the UHF reflector until you obtain | 10 |
the best reception by rotating it side to side and up and down. 10
4.3 Setting up a digital tuner with this antenna
Digital TV tuners require you to program the tuner with the available channels in your area. Generally this automatic process is part of the
If you have access to a rooftop antenna or another antenna which is currently connected to a digital tuner you may use the antenna to program the tuner. The channels will be memorized in the tuner - which will make aligning this antenna easier.
Another method is to connect the antenna directly to your TV (not using the tuner) and tune to analog channels to find best location of the antenna, then
–if you have adequate signal level you should be able to program the tuner.
2750_27.indb 6
5/7/08 10:32:48 AM