3Initial installation
Setting TV channels, date and time for the first time
AUTO INSTALL
SEARCHING
00 TV CHANNELS FOUND
hhhh_______________
PLEASE WAIT...
If your TV set supports the Easylink function and you have already corrected and/or confirmed the settings for year,month,date and time, you can skip this section.Your video recorder has already stored all the necessary details. Please continue by reading the
1Using the OK button activate the automatic initial installation
“Aim” correctly |
|
Always point the remote control at the video recorder | TIP |
and not at the TV set. |
2The set seeks out and stores all available TV channels as well as time and date. This procedure may take several minutes. As soon as all the data has been stored, the screen will show the message “STORED”.
The Teletext clock resets automatically |
|
If a TV channel which has Teletext is stored as |
|
programme number P01, the video recorder |
|
automatically takes in the date and time from the text |
|
function.The change from summer to winter time and | TIP |
vice versa should also occur automatically. |
8Despite a continued search the video recorder finds no TV channels (“00 TV CHANNELS FOUND”)
4Please be patient! The video recorder will search through the entire frequency range in order to identify the maximum possible number of available TV channels. TV channels transmitted in your country may use a higher frequency band. As soon as this range is reached, the video
reorder will find all available channels. | PROBLEM |
3The initial setting of channel, date and time is completed
8The time is not shown in the display of the video recorder
4While initial installation was going on, the set was unable to recognise the time. Please read the paragraph in Section 4 “Setting the time and
date” to correct this problem | PROBLEM |
|
SETTING TV CHANNELS, DATE AND TIME | 10 | ENGLISH |
|