Philips VR 260/07 operating instructions Problem solving Timer programming

Page 35

Problem solving (Timer programming)

PROBLEMSOLUTION

Error message:

“NO CASSETTE”

Error message:

“SWITCH TO STANDBY - TIMER RECORDING”

“k” and/or “v” are flashing in the display of the video recorder

A recording was programmed, but there is no cassette in the machine. Insert a cassette ready for recording without erase protection.

A recording was programmed, but the video recorder was not switched into

timer mode with the Standby button. Press STANDBY/ON m in order to make the programmed recording. Warning: if you do not do this, the video recorder will not record.

A recording was programmed, but there is no cassette in the machine. Insert a cassette ready for recording without erase protection.

A recording was programmed, but the video recorder was not switched into timer mode with the Standby button. Press STANDBY/ON m in order to make the programmed recording. Warning: if you do not do this, the video recorder will not record.

Error message:

“ALL TIMERS OCCUPIED“

All the available memory locations in your video recorder for timer and VIDEO Plus programming are full. Delete a programmed recording (see chapter “Delete / check / change programmed recordings”).

Cassette is ejected during recording

The end of the tape was reached during a programmed recording.The recording could not be completed satisfactorily.

Cassette is ejected after programming

The set cannot be used during recording

Year/month/date/time display appears

A cassette with erase protection was inserted. Please deactivate the erase protection or insert another cassette which is ready for recording.

Once started, a recording can only be interrupted by pressing the STANDBY/ON

button m. WARNING: This will not only stop the recording, but it will also delete the programmed recording from the memory of the video recorder.

The time has not been set or not set correctly. After entering / confirming year, month, date and time, you can continue programming.

Recording via external sources

If you want to watch or record transmissions from a satellite receiver, films from a video camera (or from other external devices), connect the device to the scart socket EXT1 AV1 or EXT2 AV2 and select the programme number on your video recorder “E1” or “E2”.

FOR

EXPERTS

ENGLISH	35	PROBLEM SOLVING (TIMER PROGRAMMING)

Image 35

Contents Table of contents With VR 260/07Remote control Important notes for operation IntroductionMost important functions of your new video recorder Important information for customers in Great Britain When using this video recorder Connecting the video recorderPreparing the remote control for operation Connecting to a TV set with a scart socketConfirm with OK ProblemCheck the cable connections Connecting additional devicesThere is no test image Setting TV channels, date and time for the first time Initial installationFollowing the corresponding instructions on Screen.PARDON? What is an on-screen menu?What is a channel, or a special channel? Searching for a TV channel manuallyDesired TV station What is a decoder?Allocating decoder Don’t know the channels for my TV stationsThis channel Using a satellite receiverCheck decoder allocation at a glance To which TV channel on the video recorder a decoder isSearching for TV channels automatically SettingsSorting and clearing of TV channels manually Additional 0.Therefore for 9 you must enter Changing the time and dateNavigation in the main menu Operating instructionsGeneral information Playing back Ntsc cassettes PlaybackPlaying cassettes Cassette 0000 hours / minutes Selecting tape position display typeWhat types of display are available to me? Display shows the playing time Remaining until the endButton G Reset / display tape positionLater by pressing a button Bookmark at the appropriate place on the tapeImmediately to playback Play compact VHS cassettes Still picture / slow motionOptimizing still picture Removing picture interferenceOptimizing tracking Manual recording Starting recording manually Stopping automatically Duration of the programmed recording, Lining up manual recordingsSelecting the recording speed Standard Play / Long Play / Auto Long PlayIs practically no loss of quality during transfer. We Recording automatically from a satellite receiverThat direct recordings are not possible Is switched offActivate / deactivate direct recording Cannot select on or OFFMaking a direct recording Programmed recordings Programming timer with Video Plus+Even if they are rescheduled. In the input field Signals on * or offExplains how to set the desired recording speed Activate VPS/PDCProblemsolution Problem solving Video Plus-ProgrammingFriday or WEEK. for recordings which are Programming timer without Video Plus+What is a memory location? Store up to six timer programmingsProgramming Timer Without Video Plus English And/or v are flashing in the display of the video recorder Problem solving Timer programmingTurbo Timer-Recording Problem solving Turbo Timer programming It has been manually deleted Using the NexTView LinkDelete / check / change programmed recordings 10Other functions Adjusting automatic switch-offAdjusting the child lock Repeat Play Replaying cassette continuouslySelect Auto Changing the TV systemTV systems Process and show several transmission systemsInstructions on the screen Adjusting the OSD informationWhat is an OSD? On-screen menu by following the correspondingEnergy-saving mode Both video recorders is possible once more Adapting remote controlFactory setting of the video recorder is VCR Recorder. Each button has been allocated a specificRemote Control Codes Using the TV remote controlOptimizing the modulator These signals are transmittedDisplay.PROBLEM 11Suppressing interferenceWhen there is interference with the picture or sound Switching the modulator on / offSwitching off the modulator With a scart cable, you can switch off the modulator12Before you call an engineer Possible Cause / SolutionEnglish English Video recorder / display English