Note
Entering your postal code is mandatory. You will not be able to complete the first installation setup without entering your postal code.
To change the default PIN code (0000), press and use the number buttons to enter you new PIN code.You will then be prompted to
Note
Your new PIN code can be any
Press the green button to confirm your choice and complete the installation.
You can now start using your HD recorder.
3.4What if no channels are found?
In case your HD recorder does not find any channels, check your connections (see pages 11 and 34) and press the red button to start the first installation setup again.
If your HD recorder is still not able to find any channels, press the yellow button. Use / to manually check the quality and strength of the signals received by your antenna in various channel frequencies.
If the Signal strength bar is green, then your antenna and HD recorder are properly connected. If it is red, then you need to first check your connection. If the Signal quality bar is green, then you can be sure that you are receiving digital broadcast signals. If your reception is not optimal (few channels or “blocky” image), you must check your antenna installation as it may need to be realigned or fixed.
E N G L I S H
Getting started | 13 |