Accessories
•Remote control Protocol: RC6
•Batteries: 2 x 1.5V type AAA/R03
•User manual
•QSG
•Freeview flyer
•Retune flyer
•Coaxial RF cable
•HDMI cable
•AC/DC converter incl. mains cord
Miscellaneous
• Temperature range (°C) Operating +5 °C to +45 °C Storage
•Mains:AC 230 V +/- 10%, 50 Hz
•Power consumption: < 15 W Standby: < 0.4 W
•Weight:
Product: 1.75 Kg
Including packaging: 2.7 Kg
• Dimensions:
Product (mm) 240 x 210 x 65 Packaging (mm) 360 x 290 x 100
Due to continued improvements, this information is subject to change without notice.
10 Frequently asked questions
Connection
Your HD recorder does not display any digital TV channels on your TV.You may also see the
•Check that the aerial cable from the aerial wall socket is correctly connected to your HD recorder (see page 11).
•There may be a temporary problem with the reception, caused, for example, by bad weather; try again later.
•Check if there is any network message related to this signal loss.You can access the
Network messages menu from Menu > Settings > Network messages.
The
Repeat the programme change request to watch the programme.
Setup
Your HD recorder does not seem to be working and there are no lights on the front panel.
Check that the 12 V power supply unit is correctly connected to your HD recorder.
Your HD recorder does not seem to be working and a channel number is shown on the
•Check that all connections are properly made (see page 11).
•Check that your TV is plugged into the mains and that it is switched on.
•Check that you have selected the correct A/V channel/source on your TV depending on how your HD recorder is connected to it (that is, using HDMI or SCART). Refer to your TV’s user manual for instructions.
E N G L I S H
Frequently asked questions | 37 |