Philips HDT 8520 Your remote control is not working, Picture seems to be stretched or squashed

Page 38

Your HD recorder seems to be switching off automatically after some time.

If your HD recorder automatically goes into standby mode (standby indicator on the front panel lights up), this is due to the Eco mode. The Eco mode is set to 3hours, by default (environmentally friendly product).To modify it, go to Menu > Settings > Preferences > Automatic Eco mode, and choose a different value. See page 30.

Your remote control is not working.

•Make sure that you point your remote control directly at your HD recorder and that nothing is between it and your HD recorder.The standby indicator on your HD recorder’s front panel should flash each time you press a remote control button.

•Check the batteries and replace them, if necessary.

The picture is not displayed on your HDTV and an HDCP authentication error is displayed.

Your HDTV does not support HDCP, which allows your HD recorder to transmit full- resolution video to your HDTV.As a result, the HDMI output displays a message masking the video, which asks you for changing the resolution down to 576p (see page 23 - Res button).

The picture seems to be stretched or squashed.

Check the TV format setting under Digital output or Analog output (Main > Settings

>Preferences).Alternatively, press the picture format button on your remote control to scroll through the different settings.

Also refer to your TV’s user manual.

Your HD recorder displays ‘err’ on the front-panel display when you plug in a USB memory stick.

Reformat your USB memory stick using a computer. Ensure that the filesystem is FAT16 or FAT32.

You cannot find all the channels you think should be available.

Retune your HD recorder (see page 31). Alternatively, reset your HD recorder to its factory default settings (see page 32) and proceed with the first installation setup.

Note

During the first installation, your choice of the network may affect the number of installed channels.

You cannot find any HD channels. Initially, HD programmes are available on channels 50 and 51. Switch to these channels. Note that the HD indicator on the front panel of your HD recorder lights up while watching an HD channel.

Digital terrestrial broadcasting is progressing in the UK.As digital switch over happens, the number of digital channels available in each region may also increase. Please visit one of the following websites to find out when the digital switch over is scheduled for your area: www.digitaluk.co.uk www.freeview.co.uk/availability (coverage checker for HD)

Your HD recorder seems to lock up or get stuck while retuning it to search for new channels.

In parts of the country where the analogue TV services have already been switched off, the time taken to retune can increase.This is because your HD recorder scans for all the transmitters in your area, which can take up to 15 minutes. Please wait for the retune to complete.This is not a fault.

38

Frequently asked questions

Page 37 Page 39
Image 38
Page 37 Page 39
Contents HDT Page Table of contents Page Safety information Missing12 V power supply unit has been designed for indoor use only Reducing power consumption Your HD recorder What’s in the box?Overview Front Panel Front panel Remote controlWhat you also need not supplied? Rear panel Rear PanelGetting started How to read this manual?Preparing your remote control TipConnect the mains plug to the mains wall socket Connecting your HdtvInstalling your HD recorder Getting started You can now start using your HD recorder What if no channels are found?Using your HD recorder More about the channel banner content Using your HD recorderAll Radio channel list, or your favourite lists Using channel listsUsing the TV guide Changing current channel listUsing the Tools menu Settings OptionsHigh-speed playback Instant replayMoving through the time-shift bar Slow-motion playbackScheduling recordings Buffer progress bar List of program in the buffer Time-shift bar for a paused programmeControlling playback and recording To pause playback at any moment, press pause K Watching recorded programmesRecordings menu appears Using more of your HD recorder Up from standby VOL + Turn volume up/down Mute/restore sound15 1 TV channelsFront-panel display messages Using more of your HD recorder Creating a favourite list Using the Main menuManaging favourite lists Renaming favourite lists Using the Settings menuAccessing the Settings menu Modifying/Editing favourite listsDisplay Setting your preferencesAuto when audio is muted or For hearing-impaired SecondsDigital output Automatic eco modeDefault volume Hours, 6 hours, 7 hours or 8 hours Return channelLock settings see below will not have any effect Settings menu Retuning your HD recorderUpdating your HD recorder’s software manually Use / to highlight Factory reset and press OK twiceChanging other system settings Maintenance Option a Optical S/PDIF connection Digital Connecting your audio equipmentSystem settings Option B Electrical S/PDIF connection DigitalStandard definition Guarantee and serviceTechnical data High definitionProcessor STi Reception DemodulationRepeat the programme change request to watch the programme Frequently asked questionsBatteries 2 x 1.5V type AAA/R03 Picture seems to be stretched or squashed Your remote control is not workingCheck the batteries and replace them, if necessary Your hard disk is full with protected recordings Aspect ratio GlossaryAnalogue audio Digital audioPIN Code EasyLinkLip Synchronisation SurroundChange channel, 14 Channel banner, 14 Connect Hdmi Control volume Favourite lists CreateIndex HDT 8520/05Trademarks and partner logos Trademarks and partner logos
Top Page Image Contents