Philips DVDR3440H user manual Connecting the video cable, Option 1 Using a Scart cable

English

Step 1: Basic Recorder Connections (continued)

			VIDEO
AN-
TENNA		S-VIDEO
EXT2	AUX - I/O
		(Y/C)	L
			AUDIO
TV			R
EXT1	TO TV - I/O	AUDIO	/ VIDEO OUT	COAXIAL
				DIGITAL AUDIO OUT
			Option 2	OR

OR

Option 1

Option 3

TV

Connecting the video cable

This connection enables you to view the disc playback from the recorder. You only need to choose one of the options below to make your video connection.

Option 1: Using a SCART cable

Use the SCART cable to connect the EXT1 TO TV-I/Oscart socket on the recorder to the corresponding SCART input socket on the TV.

Helpful Hints:

–If your TV set displays a selection for the SCART socket, select ‘VCR’ as the source for the SCART socket.

–The EXT2 AUX-I/O scart socket is intended only for additional devices.

Option 2: Using an S-Video cable

Use an S-video cable (not supplied) to connect the S-VIDEO(Y/C)socket on the recorder to the S-Video input socket (or labelled as Y/C or S-VHS) on the TV.

Audio connection is required in order to hear the sound, see next section “Connecting the audio cables”.

Option 3: Using a Video (CVBS) cable

Use a composite video cable (yellow - not supplied) to connect the VIDEO (CVBS) socket on the recorder to the video input socket (or labelled as A/V In, Video In, Composite or Baseband) on the TV.

Audio connection is required in order to hear the sound, see next section “Connecting the audio cables”.

TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.

16