Philips DVDR3440H user manual Change Password, OK on the remote control to confirm

CANCELOK

OK OK

Setup Menu Options (continued)

PREFERENCES settings (underlined options are the factory default settings)

English

Change Password

New Password
Enter password	* * * *

Enter new password		* * * *
Re-enter password
OK	CANCELOK

Change your password setting for locking/ unlocking a title recording.

1)Use ST keys to highlight { Change Password } and press OK. You will be prompted to enter your four-digit pin code.

2)Use the numeric keypad 0-9 to enter your four-digit pin code.

When doing this for the first time, enter the default password ‘3308’.

If you forget your four-digit pin code, the default password is 3308.

3) Enter your new password and press T.

4) Re-enter your new password and select OK OK	, then press
OK on the remote control to confirm.

Reset Menu Settings

Screensaver

Restore all the settings of this recorder to factory settings.

Press X to reset the menu settings of this recorder.

A warning message will appear. Select in the menu

to proceed or to abort, then press OK to confirm.

The screen saver prevents damage to the TV screen by avoiding exposure to a static image for too long.

Press X to access this menu and use ST keys to select one of the options.

{ On }	– Select this if you wish to turn off the TV
	screen, after playback had been stopped or
	paused for more than 15 minutes.
{ Off }	– Select this to disable the screen saver.

67