Philips VR507, VR570 Using the satellite receiver, Dont know the channels for my TV stations

Page 18

I don't know the channels for my TV stations

In this case,		press	in	line	'CHANNEL NUMBER' to start	the
automatic	channel search. A changing				channel number will appear on	the
TV screen.
Continue	the	automatic	search	until	you have found the desired	TV
channel.

What is NICAM?

NICAM is a digital sound transmission system. Using NICAM, you can transmit either 1 stereo channel or 2 separate mono channels. However, if you experience poor reception resulting in sound disruptions, you can turn off

NICAM.
In line 'NICAM', select 'OFF' using	or	.

8Save the TV channel with OK . 'STORED' will briefly appear on the TV screen.

9To search for other TV channels, begin again at step 3 .

0To end, press MENU .

Using the satellite receiver

TV channels from a satellite receiver (connected		to the scart socket EXT.2 AV. 2 ) are
received on the video recorder on programme number 'E2'.
To do this, select programme number 'E1' with		0 on the remote control and then select
programme number 'E2' with P	.

You should select the TV channels to be received by the satellite receiver directly on the receiver itself.

14	Installing your video recording

Image 18

Contents Table of contents Remote control Additional TV functions Front of the deviceSymbols on your video recorder display Page Introduction PhilDear Philips customer Voltage 220-240V/50Hz SpecificationsSupplied accessories Energy consumption 16WImportant notes regarding operation Special functions of your new video recorder Important information for customers in Great Britain Connecting your video recorder to the TV set Connecting the video recorderPreparing the remote control for operation Connecting with a scart cableBack of the video recorder and the other Connecting with a scart cableAV at Scart socket on your TV set reserved for VideoConnecting without a scart cable My screen is emptySocket EXT.2 AV Connecting additional devicesYou can find more details in chapter Initial Installation Do not see a test screenInstalling your video recording Initial installationSeeks out and stores all available TV channels Decoder allocation Manual TV channel search Line Manual Search using Confirm WithWhat is a special channel? That you want to use for the TV channel, e.g. P01Using the satellite receiver What is NICAM?Dont know the channels for my TV stations Follow TV Cannot switch my TV set to programme numberSorting TV channels automatically With a scart cableDeleting sorting Autoinstall Automatic TV channel searchMonitor function Want to assign to this programme number, e.g. P02 Sorting and clearing TV channels manuallyWant to assign to the programme number P01 Deleting TV channelsSetting the time and date Time/date is displayed incorrectly despite manual settingMain menu will appear on the screen Important notes for operation Navigation in the screen menuCall up the menu with Playback Playing cassettesDisplaying current tape position Automatic switch-off of special functionsPlaying back Ntsc cassettes How can I set the counter to 00000?Searching for a tape position with picture scanning Still picture / slow motionStop the tape with Stop Instant ViewAutomatic search for a tape position index search Press Reverse orPress Index . Then press Stop . This will, for example It automatically switches to pauseAutomatic search for a blank space on the tape Appear in the displayOptimising still picture Eliminating picture interferenceOptimising tracking Until Trac TRACkingManual recording Recording without automatic switch-offAutomatic switch-off General informationLining up recordings assemble cut Record Press Record on the remote controlPreventing accidental erasing of cassettes Record you will add 30 minutes toSelecting the recording speed SP or LP Confirm with OK To end, press MenuOr P Select function on with Switching off Record LinkWith OK Confirm with OK To end, press Menu Insert a cassetteHow does Direct Record work? Search symbol appears in the display a moving symbolDirect Record Notv appears in the displaySwitching Direct Record on or off Programming a recording with Video Plus+ Programming a recording TimerWhat is VPS/PDC? What do I need to know about VPS/PDC?Recorder is switched off with STANDBY/ON Data withRecorder display Recording Timer block, select it with P Or P Problems and solutions for programmed recordingsThen all Timer blocks are already End of the tape was reached during recordingProgramming a recording without Video Plus+ 9on the remote controlSwitching on VPS/PDC in the Start input field Programme numbers of the E1 and E2 scart socketProblem solving for programmed recordings ProblemPress Turbo Timer Programming a recording with TurboProblem Solution CassettePress Clear CL Delete programmed recordingSelect the TV Other functionsChanging the video colour system With LeastSwitching the on-screen display OSD off or on Child lockWill flash in the video recorder display Which settings can I choose? Switch off the clock displayLine OSD, select the desired setting with How can I switch on the clock display?Continuous playback Automatic switch-off Automatic switch to Mono Press Select . This will show the current sound settingWhat goes on behind the settings? Selecting the sound channelSuppressing interference Optimising the modulatorFrequency as the video recorder Or P Select OFF on the TV screen with Switching the modulator on / offHow can I switch the modulator back on? Modulator offBefore you call an engineer Hotline telephone numbersWith STANDBY/ON Before you call an engineer