Philips VR507, VR570 With OK, Or P Select function on with, Switching off Record Link

Page 34

SPECIAL SETTINGS
OSD	è ON	p
CLOCK DISPLAY	OFF
RECORD LINK	OFF
REPEAT PLAY	OFF
DIRECT RECORD	ON

________________________________

EXITpMENUSTOREpOK

Automatic controlled recording from a satellite receiver (RECORD LINK)

This function automatically starts recording on the switched-off video recorder when a video signal is recognised through the connected scart cable. If your satellite receiver has a programming function, the recording will start automatically (as long as the satellite receiver is switched on).

1Switch on the TV set. If required, select the programme number for the video recorder.

2Press MENU on the remote control. The main menu will appear.

3	Select line 'SPECIAL SETTINGS' using		P	or	P	and confirm
	with OK .
4	Select line 'RECORD LINK' using	P	or P		.
5	Select function 'ON' with	or		.

Switching off 'Record Link'

To switch off the function, select 'OFF'.

6Confirm with OK .

7To end, press MENU .

8Insert a cassette.

9Use a scart cable to connect scart socket EXT.2 AV. 2 on the video recorder to the corresponding scart socket on the satellite receiver.

0Programme the satellite receiver with the required information (programme number of the TV channel, start time, end time).

If necessary, please see the operating instructions for your satellite receiver.

A Switch off the video recorder with STANDBY/ON .

The video recorder is now ready to record. The beginning and end of the recording is controlled via scart socket EXT.2 AV. 2 .

When this function is switched on, ' ' will appear on the video recorder display.

30	Manual recording

Image 34

Contents Table of contents Remote control Additional TV functions Front of the deviceSymbols on your video recorder display Page Phil IntroductionDear Philips customer Voltage 220-240V/50Hz SpecificationsSupplied accessories Energy consumption 16WImportant notes regarding operation Special functions of your new video recorder Important information for customers in Great Britain Connecting your video recorder to the TV set Connecting the video recorderPreparing the remote control for operation Connecting with a scart cableBack of the video recorder and the other Connecting with a scart cableAV at Scart socket on your TV set reserved for VideoConnecting without a scart cable My screen is emptySocket EXT.2 AV Connecting additional devicesYou can find more details in chapter Initial Installation Do not see a test screenInitial installation Installing your video recordingSeeks out and stores all available TV channels Decoder allocation Manual TV channel search Line Manual Search using Confirm WithWhat is a special channel? That you want to use for the TV channel, e.g. P01What is NICAM? Using the satellite receiverDont know the channels for my TV stations Follow TV Cannot switch my TV set to programme numberSorting TV channels automatically With a scart cableDeleting sorting Automatic TV channel search AutoinstallMonitor function Want to assign to this programme number, e.g. P02 Sorting and clearing TV channels manuallyWant to assign to the programme number P01 Deleting TV channelsTime/date is displayed incorrectly despite manual setting Setting the time and dateMain menu will appear on the screen Navigation in the screen menu Important notes for operationCall up the menu with Playback Playing cassettesDisplaying current tape position Automatic switch-off of special functionsPlaying back Ntsc cassettes How can I set the counter to 00000?Searching for a tape position with picture scanning Still picture / slow motionStop the tape with Stop Instant ViewAutomatic search for a tape position index search Press Reverse orPress Index . Then press Stop . This will, for example It automatically switches to pauseAutomatic search for a blank space on the tape Appear in the displayOptimising still picture Eliminating picture interferenceOptimising tracking Until Trac TRACkingManual recording Recording without automatic switch-offAutomatic switch-off General informationLining up recordings assemble cut Record Press Record on the remote controlPreventing accidental erasing of cassettes Record you will add 30 minutes toSelecting the recording speed SP or LP Confirm with OK To end, press MenuOr P Select function on with Switching off Record LinkWith OK Confirm with OK To end, press Menu Insert a cassetteHow does Direct Record work? Search symbol appears in the display a moving symbolDirect Record Notv appears in the displaySwitching Direct Record on or off Programming a recording with Video Plus+ Programming a recording TimerWhat is VPS/PDC? What do I need to know about VPS/PDC?Data with Recorder is switched off with STANDBY/ONRecorder display Recording Timer block, select it with P Or P Problems and solutions for programmed recordingsThen all Timer blocks are already End of the tape was reached during recordingProgramming a recording without Video Plus+ 9on the remote controlSwitching on VPS/PDC in the Start input field Programme numbers of the E1 and E2 scart socketProblem solving for programmed recordings ProblemPress Turbo Timer Programming a recording with TurboProblem Solution CassettePress Clear CL Delete programmed recordingSelect the TV Other functionsChanging the video colour system With LeastChild lock Switching the on-screen display OSD off or onWill flash in the video recorder display Which settings can I choose? Switch off the clock displayLine OSD, select the desired setting with How can I switch on the clock display?Continuous playback Automatic switch-off Automatic switch to Mono Press Select . This will show the current sound settingWhat goes on behind the settings? Selecting the sound channelOptimising the modulator Suppressing interferenceFrequency as the video recorder Or P Select OFF on the TV screen with Switching the modulator on / offHow can I switch the modulator back on? Modulator offHotline telephone numbers Before you call an engineerWith STANDBY/ON Before you call an engineer