Other Functions, Changing the video colour system

1.Press

STANDBY/ON y

T6460/550/552EZ(EN)_EST.qx3 04.1.28 4:15 PM Page 13

How to change a programmed recording (TIMER)

1.Press MENU . The main menu will appear.

2.Select ‘TIMER’ with PLAY B-Kor STOP C-L .

Then press FWD 1- B .

3.Select ONCE, DAILY or WEEKLY recording with PLAY B-Kor STOP C-L . Then press

FWD 1- B .

4.Select a TIMER block with 0..9 . (The flashing number indicates an empty TIMER block.)

ONCE

TIMER - 1 2 3 4 5 6 7 8 -

SELECT TIMER NUMBER

END=EXIT

5.Press	CLEAR	to delete information and input
correct information with						.
				0..9

6.To end, press					.
			STATUS/EXIT

7.Switch off with							.
			STANDBY/ON y

Problems and solutions for pro- grammed recordings

Cassette was ejected as soon as the button was pressed

•A cassette without the security tab was insert- ed. Undo the erase protection (chapter ‘Manual recording’, section ‘Preventing acci- dental erasing’) or insert a different cassette.

‘TURN OFF YOUR TVCR FOR TIMER RECORDING’ flashes on the TV screen

•The TV-Video Combi is switched on several minutes before the start of a programmed recording. Switch off the TV-Video Combi with

STANDBY/ON y . A programmed recording

(timer) will only function when the TV-Video Combi is switched off.

Cassette is ejected during recording

•The end of the tape was reached during recording.

The TV-Video Combi does not react

•While a programmed recording is being made, you cannot operate your TV-Video Combi manually. If you want to cancel the pro- grammed recording, press STOP/EJECT on the front panel.

8. Other Functions

Changing the video (colour) system

If you playback recordings made on other video recorders or you want to record from external sources (via the scart socket), the automatic video (colour) system switch-over may lead to colour distortion.

You can switch off the automatic TV system switch-over as follows.

Video (colour) systems

Other countries, other video (colour) systems: In central Europe transmissions are broadcast in the PAL system (Phase Alternation Line) standard. France uses SECAM (Séquentiel à mémoire). Middle East countries use ME- SECAM (Middle East SECAM). In some coun- tries (USA and Japan), TV viewers receive their programmes as an NTSC signal (National Television System Committee).

SYSTEM on the remote control to select the TV (colour) system with the least disruptions during playback.

Each pressing SYSTEM , the display will change cyclicaly; AUTO, ME-SECAM, PAL.

AUTO

2.After 5 seconds, the OSD will disappear.

Switching the status display off or on

Along with the on screen menu, the status dis- play also displays information on the current operating status (counter, playback, recording, TV channel, etc.) on the TV screen. You can switch off the information about the operating status so that the status display is not recorded when copying videocassettes.