Friedrich CP15F10 Starting Your Air Conditioner-DigitalControl, Temperature, Timer Delay, Mode

Starting Your Air Conditioner—Digital Control

Money	Auto Swing		Timer
Saver®
		0F
			Temp/Hour
POWER		Hr.
Cool		High
	Mode	Med	Fan Speed
Fan Only		Low

Temperature

Press, or press and hold, the plus button to raise the temperature 1º until it reaches 90ºF (32.2ºC).

0F

Temp/Hour

Hr.

Press, or press and hold, the minus button to lower the temperature 1º until it reaches 60ºF (15.5ºC).

1.Press POWER to turn on air conditioner.

POWER

NOTE: When the unit is turned on, it will display the previous settings for the Mode, Fan Speed and temperature.

Timer Delay

To set the Timer for a 1- to 24-hour delay until the air conditioner turns off (the air conditioner must be On):

1.Press TIMER. Indicator light will flash.

Timer

2.Choose mode. See “Mode .”

3.Choose fan speed. See “Fan Speed.”

4.Choose temperature. See “Temperature.”

Mode

1.Press and hold MODE.

2.Choose Cool or Fan mode

Cool—Cools room. Press FAN SPEED to choose fan speed. Then adjust the temperature by pressing the up or down arrow buttons.

Fan—Operates the fan at High speed, without cool ing. The display shows “FO” (fan only).

Money Saver®

Money Saver — Cycles fan with compressor when room temperature reaches the temperature setting on the thermostat.

Cool	Money
Mode
Fan Only	Saver®

Fan Speed

NOTE: The Fan Speed button will operate when the Cool, Money Saver or Fan Only mode has been selected.

1.Press the Fan Speed button until you see the indicator light for the desired setting.

2.Choose Low, Medium or High.

High

Med Fan Speed

Low

2.Press the plus or minus button to change the delay time from 1 to 24 hours.

3.Press TIMER or wait 10 seconds. Indicator light will remain on.

To set the Timer delay for a 1- to 24-hour delay until the air conditioner turns on, keeping previous settings:

1.Turn off air conditioner.

2.Press TIMER. Indicator light will flash.

3.Press the plus or minus button to change the delay time from 1 to 24 hours.

4.Press TIMER or wait 10 seconds. Indicator light will remain on.

To set the Timer delay for a 1- to 24-hour delay until the air conditioner turns on, changing previous settings:

1.Turn on air conditioner.

2.Adjust MODE to desired setting.

3.Adjust FAN SPEED to Low, Medium or High.

4.Adjust temperature between 60ºF (15.5ºC) and 90ºF (32.2ºC).

5.Turn off air conditioner.

6.Press TIMER. Indicator light will flash.

7.Press the plus or minus button to change delay time from 1 to 24 hours.

8.Press TIMER or wait 10 seconds.

To clear Timer delay program

NOTE: Air conditioner can be either on or off.

Press TIMER. Indicator light will turn off.

12