How to check or change a Timer

Under ’REP.’, use the P rB or AP q button to select daily or weekly programming.

’Mo-Fr’: If you want to make a recording every day from Monday to Friday.

’Mo-Su’: If you want to make a recording every day from Monday to Sunday.

’WEEKL’: If you want to make a recording every week on the same day of the week.

’ONCE’: If you want to make only one recording.

Under ’LP’, use the P rB or AP q button to select the recording speed ’SP’ or ’LP’.

Under ’VPS/PDC’, use the P rB or AP q button to switch ’VPS or PDC’ on or off.

fConfirm with the OK button when the information is correct.

’Press STANDBY to start recording’ will appear on the screen. If you have programmed a recording that should start within the next few minutes, confirm with the STANDBY m button. If you have programmed a recording that will start at some later point in time, confirm with the OK button.

A programmed recording can only start, when the machine is switched to standby.

If you entered the wrong date for a daily/weekly recording, your TV-VIDEO Combi will correct it automatically.

gIf you confirmed with the OK button, exit the menu with the TIMER k button.

The programming information has been stored in a TIMER block.

hMake sure that the cassette you have put in can be recorded on.

aPress the TIMER k button on the remote control.

bSelect the line ’Timer programming’ with the

buttons P rB or AP q and confirm with the SqC button.

cSelect the TIMER you want to check or change with the

P rB or AP q button and confirm with the OK button.

dSelect the entry field with the DSr or SqC button.

e Change any information with the P rB or AP q button or with the 0-9buttons.

Under ’LP’, use the P rB or AP q button to select the recording speed ’SP’ or ’LP’.

fConfirm with the OK button when the information is correct.

g Confirm the message on the screen with the OK button. A TIMER recording can only start, if the set is not used for other video recorder functions (e.g. playback).

The programming information has been stored in a TIMER block.

h To end, press the TIMER k button.

iMake sure that the cassette you have put in can be recorded on.

How to clear a TIMER

aPress the TIMER k button on the remote control.

bSelect the line ’Timer programming’ with the

buttons P rB or AP q and confirm with the SqC button.

cSelect the TIMER you want to clear with the buttons

P rB or AP q .

dPress the CLEAR button.

e Switch off with the TIMER k button.