1.CONNECTING YOUR TV-VIDEO COMBI
Important for the United Kingdom |
| Connecting the cables |
This machine is fitted with an approved moulded 13 Amp plug. To change a fuse in this type of plug, please follow these instructions.
aTake off the fuse cover and take out the fuse.
bPut in a new fuse which should be a BS1362 5A, A.S.T.A. or BSI approved type.
cRefit the fuse cover.
If the plug fitted is not suitable for your socket, cut it off and fit another type.
If the plug you fit contains a fuse, it should be a 5Amp fuse. If you fit a plug which does not need a fuse, make sure the fuse on your fuse box is not greater than 5 Amps.
Note: Please destroy the plug you have cut off so that it cannot be used in a 13 Amp socket somewhere else.
How to connect a plug
The wires in the lead from the video recorder are coloured as follows.
*Blue - ’neutral’ (’N’).
*Brown - ’live’ (’L’).
dConnect the blue wire to the terminal in the plug which is marked with the letter ’N’ or coloured black.
eConnect the brown wire to the terminal in the plug which is marked with the letter ’L’ or coloured red.
fDo not connect either of the wires to the terminal in the plug which is marked with the letter ’E’, the symbol \or coloured green or green and yellow.
Before you refit the plug cover, make sure that the grip at the bottom of the plug is clamped over the plastic cover of the lead, not just over the two wires.
aInsert the aerial plug into the 2 socket.
bInsert the plug of the mains cable into the wall socket.
cIf the little red light at the front of the set is not alight,
please switch on the set. The power switch 8 is located on the left side panel of the set.
Connecting a decoder or other equipment
You can also connect additional equipment to the EXT.1
socket. For instance, a satellite receiver, decoder or camcorder.
4