Automatic Tuning, Desired channel with, Step

FWD 1- B

Manual TV channel search

Using the satellite receiver

In some cases it can occur that all TV channels are not found and saved during the first installa- tion. In this case, the missing TV channels must be searched for and stored manually.

1.Press MENU . The main menu will appear.

2.Select 'TUNER SET UP' withPLAY B-KSTOP C-Land confirm with FWD 1- B .

You can receive channels from the satellite

receiver via the scart socket AV1/EXT1 .

To do this, select the channel number 'AV1' by pressing 0,0,1, with the keys 0..9 on the remote

control.You will have to select the channel you want to receive on the satellite receiver itself.

3.Select 'MANUAL TUNING' withPLAY B-K

STOP C-Land confirm with FWD 1- B . 4.Select 'PROG.' withPLAY B-K STOP C-L . Then

press FWD 1- B .

MANUAL TUNING

→PROG. P55

CHANNEL 055

DECODER [OFF]

SKIP[OFF]

SELECT K L CHOOSE B

END=EXIT

5.With PLAY B-K STOP C-Lor 0..9 , select the desired programme number that you want to use for the TV channel, e.g. 'P01'. Then press .

What is a special channel?

TV channels are transmitted in certain pre-defined frequency ranges. These ranges are divided into channels.

A specific frequency/channel is assigned to each TV station.

Certain frequency ranges are specified as special channels (hyperband channels).

PLAY B-K

STOP C-L

6.Select 'CHANNEL' with

and confirm with

. Then enter the

FWD 1- B

desired channel with

0..9

When a channel is found,it will stop searching. If

this is the channel you want, press

. If

FWD 1- B

you set SKIP on for a channel, this channel will

be ignored when going through the channels

with

PROG P+

PROG P–

To search for other TV channels, begin again at

step 4.

I don't know the channels for my TV stations

In this case, press

in 'CHAN-

PLAY B-K

STOP C-L

NEL' to start the automatic channel search. A changing channel number will appear on the TV screen. Continue the automatic search until you have found the desired TV channel.

7.To end, press STATUS/EXIT .

Automatic Tuning

During installation, all available TV channels are searched for and saved. If the channel assign- ments of your cable or satellite TV provider change or if you are reinstalling the TV-Video Combi, e.g. after moving house, you can start this procedure again. This will replace the TV channels already saved with the new ones. 1.Press MENU . The main menu will appear.

2.Select 'TUNER SET UP' withPLAY B-K

STOP C-Land confirm with FWD 1- B . 3.Select 'AUTO TUNING' withPLAY B-K

STOP C-L , and confirm with FWD 1- B .

PLEASE WAIT

STARTFINISH

❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚❚❚❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚

4.The automatic TV channel search starts. This allows the TV-Video Combi to save all avail- able TV channels. This procedure may take several minutes.

5.When the TV channel search is complete, 'AUTO TUNING COMPLETED' will briefly appear on the TV screen.

7	EN