Installing your TV-Video Combi | Philips 14PV201, 14PV401, 14PV101

6.Use

'DECODER'.

3. Installing your TV-Video Combi

Preparation for use

This chapter shows you how to prepare your TV- Video Combi for use. The TV-Video Combi auto- matically seeks out and stores all available TV channels.

Connecting additional devices

After you have connected additional devices (satellite receiver, etc.) through the aerial cable, switch them on. The automatic channel search will recognise them and save them.

1.Select the desired language for the on-screen menu by pressing PLAY B-K STOP C-L .

2.Press MENU .

3.Confirm with PROG P+ .

The automatic TV channel search starts.

PLEASE WAIT

STARTFINISH

❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚❚❚❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚

<14PV 225>

4.'TIME' and 'DATE' will appear on the TV

screen.

TIME --:--

DATE --/--/--

SMART CLOCK [ON]

END=EXIT

5.Check 'TIME'. If required, please change the time with the number buttons 0..9 .

6.Check if the displayed settings for 'DAY', 'MONTH' and 'YEAR' are correct.

7.When all information is correct, save by

pressing STATUS/EXIT .

The preparation for use is now complete.

Satellite receiver

If you are connecting a satellite receiver, please read the section 'Using the satellite receiver'.

Decoder

If you are connecting a decoder, you must install it as described in the next section.

Decoder allocation

Some TV channels transmit encoded TV signals which can only be viewed with a commercially purchased or hired decoder without distur- bances. You can connect such a decoder to this TV-Video Combi. The following function will auto- matically activate the connected decoder for the desired TV channel.

1.Use

PROG P+

PROG P–

0..9

to select the

TV channel which you would like to allocate

the decoder to.

2.Press

. The main menu will appear.

3.Use

to select 'TUNER

PLAY B-K

STOP C-L

SET UP'. Then press

FWD 1- B

4.Use

to select 'MANUAL

PLAY B-K

STOP C-L

TUNING'. Then press

FWD 1- B

5.Use

to select

PLAY B-K

STOP C-L

MANUAL TUNING

PROG. P55

CHANNEL 055

→DECODER [OFF]

SKIP[OFF]

SELECT K L CHOOSE B

END=EXIT

FWD 1- B to select 'ON'

(Decoder switched on).

How can I switch off the decoder?

Use FWD 1- B to select 'OFF' (Decoder switched off).

7.To end, press STATUS/EXIT .

The decoder has now been allocated to this TV channel.

EN	6