Philips CC13C1MG, CC19C1MG owner manual Specifications

Page 56

56 Specifications

General

CRT: 13-inch in line gun (CC13C1MG) 19-inch in line gun (CC19C1MG)

Television system: NTSC-M

Closed caption system: Section 15.119, FCC (Federal Communications Commission) Standard

Video Heads: Two heads

Tape width: 1/2 inch (12.65 mm) Tape speed

SP: 33.35 mm/sec.

LP: 16.67 mm/sec.

SLP: 11.12 mm/sec.

Operating Temperature: 41˚F (5˚C) to 104˚F (40˚C)

Relative Humidity: 10% to 75%

Power requirement: AC 120V, 60Hz

Power consumption: 65W (CC13C1MG) 90W (CC19C1MG)

Sound output: 1W Dimensions:

15-3/4" (H) x 15-3/16" (W) x 14-13/16" (D)

400mm x 386mm x 377mm

(CC13C1MG)

19-11/16" (H) x 19-7/16" (W) x 18-5/16" (D) (CC19C1MG) 500mm x 494mm x 465mm

Weight: 24.3 lbs (11.0 kg) (CC13C1MG)

Weight: 44.1 lbs (20.0 kg) (CC19C1MG)

Tuner Broadcast Channels

VHF 2-13, UHF 14-69

Cable TV Channels

1-125

Terminals

Antenna In: VHF/UHF 75 ohms unbalanced

Video In: RCA connector

Audio In: RCA connector

Earphone: 3.5 mm CES

Electrical Specifications

Video input level: 0.5~2.0Vp-p

Audio input level: -10dBv

Video S/N ratio

SP: More than 42dBµ

Audio S/N ratio

SP: More than 38dB

Designs and specifications are subject to change without notice and without our legal obligation.

Page 55 Page 57
Image 56
Page 55 Page 57
Contents
Tvcr Warranty Verification For Customer UseFeatures Safety PrecautionsIntroduction Declaration of ConformityTable of Contents Battery Safety Using the Remote ControlTV/VCR Maintenance Replace the battery compartment lidHook up your TV/VCR using one of the connections shown Hooking Up the TV/VCRRF coaxial cable Not supplied Rod AntennaHooking Up the TV/VCR cont’d Bent pinCrooked Pin Straight Pin Cable PlugTurning On the TV/VCR Press the Menu button. The screen shown below will appearSelect Language English Español Select KL To END Press Exit Language SelectionPress the Menu button Automatic Channel Setup Wait for the TV/VCR to set up channelsAdding/Deleting Channels Press the PLAY/o button or the STOP/p button to selectRepeat steps 3-4 to add or delete other channels Programming of the channel you added or deleted will appearCable Box users must set the clock manually Setting the ClockManual Clock Setting SET Manual Clock Time Date To END Press Exit SET Manual Clock TimeMonth To Correct Press Clear To END Press Exit Date Sunday To Correct Press Clear To END Press ExitSetting the Clock cont’d PRIM. Setup Press BVCR Program VCR Setup Caption Reminder Brightness Automatic PBS Channel SelectionNOW Searching flashes on the TV/VCR screen Wait for the TV/VCR to find the timeSET Auto Clock Time Date NOW Searching To END Press Exit SET Auto Clock TimeManual PBS Channel Selection Use the Number buttons to select your PBS station PRIM. SETUP. Then, press the F.FWD/B button PRIM. Setup Press B VCR Program VCR SetupDaylight-Savings Time Press the PLAY/ button or the STOP/ button to selectPrimary Setup Volume BAR SET Clock Select KL Choose B To END Press ExitTime Zone Press the Menu button, then press the STATUS/EXIT buttonFront Panel AC Power Cord Rear PanelANTenna Jack Connect your antenna or cable here. Details are on page sixRemote Control Buttons Menu Button STATUS/EXIT ButtonREWind/ Button STOP/ ButtonAdjusting the Picture Controls When you finish, press the STATUS/EXIT buttonAdjusting the Picture Controls cont’d Tint KK Sharpness TV ResetDecrease Increase Decreased brightnessOn-Screen Status Displays If you select Status ON, then select Counter only OFFIf you select Status ON, then select Counter only on If you select Status OFFReminder OFFInsert a tape in the TV/VCR PlayingFollow the steps below to play a tape Recording Read and follow the steps below to record a TV programTo stop recording, press the STOP/ button Tape Speeds HrsLength Press OTR Cancel Press Clear One-Touch RecordingTape is in the TV/VCR. The record tab must be intact Press the STOP/EJECT but- ton on the TV/VCR to stop the OTRTV/VCR is now in Line Input mode Rerecording Tape DuplicationSelect Program Number To END Press Exit Timer RecordingDaily ONE Time Program Channel Time on Time OFF To Correct Press Clear To END Press ExitTimer Recording cont’d Timer recording information for the program in the lowest With the TV/VCR on, press the Menu buttonProgram REVIEW, then press the F.FWD/B button Gram Review and press the F.FWD/B buttonVCR Setup ONE Time Play Defeat RecordingFollow the steps below to prevent accidental recording REC DefeatedVCR SETUP, then press the F.FWD/B button VCR Setup ONE Time Play Repeat Play onRepeat Play TV programming will appear while the tape is rewindingInsert a tape in the TV/VCR Press the Menu button VCR Setup ONE Time Play Repeat Play A-BB Repeat Play Repeat Play cont’d RepeatStop Real-Time Counter MemoryAppear on the screen Viewing a Still Picture Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Smartlock menu will appear SmartLockTo block ratings, follow the steps below Example Specific Sub-ratings SmartLock cont’dRatings are defined on To change the access code, follow these steps After you enter the code, the Smartlock menu will appearBlocked Ratings TV-Y7 TV-GVCR Program VCR Setup Caption Reminder Blue BackgroundPress the SLEEP/WAKE UP button Sleep TimerTimer during a recording Timer Sleep Wake UP Wake Up TimerTimer Sleep Wake UP TV on ON-TIME Volume Bar VCR Program VCR Setup CaptionTo Adjust Press / B Caption Closed CaptionExample Menu ScreenHalf-screen text Closed Caption cont’dStandard Closed Captions Automatic Operation Features Glossary Helpful Hints Helpful Hints cont’d Specifications Renewed Index Page Supplied Accessories
Top Page Image Contents