Philips CCB 092AT owner manual Recording, To stop recording, press the STOP/ button Tape Speeds

Page 30

30 Recording

Read and follow the steps below to record a TV program.

1

Place a tape with its record tab intact (see page five) in the TV/VCR. The power will come on. Or, if the tape is already in the TV/VCR, press the POWER button to turn on the TV/VCR, if necessary.

2

Press the SPEED button until the desired tape speed appears on the TV/VCR screen. Details about tape speed are given below.

3

Use the CH(annel) m/n button or the Number buttons to select the channel to be recorded. (Channels cannot be changed

during recording.)

4

Press the REC(ord)/OTR button once to start recording. The RECORD light will glow.

If there is not a tape in the TV/VCR, NO CASSETTE flashes on the screen briefly.

If the tape does not have a record tab, PROTECTED CASSETTE CANNOT RECORD flashes on the screen briefly. The TV/VCR will eject the tape. Insert another tape.

5

To pause the recording (for example, during commercials), press the PAUSE/STILL button. The RECORD light will flash.

To resume recording, press the PAUSE/STILL button again or the REC(ord)/OTR button. The RECORD light will glow.

6

To stop recording, press the STOP/button.

Tape Speeds

This chart shows the recording/playback time for three types of video cassettes (T160, T120, and T60). There are three playback speeds: SP, LP, and SLP. During playback, the VCR selects the tape speed automatically. When recording, you can change the tape speed using the SPEED button. You cannot record in LP speed.

 

Cassette type / Playback Time

Tape Speed

T160

T120

T60

SP(Standard Play)

2 hrs.

2

hrs.

1 hr.

 

40 mins.

 

 

 

 

LP(Long Play)

5 hrs.

4

hrs.

2 hrs.

(playback only)

20 mins.

 

 

 

 

 

 

 

 

SLP(Super Long Play)

8 hrs.

6

hrs.

3 hrs.

 

 

 

 

 

 

1

POWER

 

SLEEP/WAKE UP

 

6

 

PLAY

 

 

REW

 

 

F.FWD

 

 

STOP

 

 

MENU

STATUS/EXIT

CLEAR

3

 

1

2

3

 

 

4

5

6

CH.

 

7

8

9

 

 

2

 

0

ALT. CH

VOL.

 

 

 

 

SPEED MEMORY

PAUSE/STILL

 

REC/OTR

TRACKING

MUTE

 

4

 

 

 

 

5

Helpful Hints

You cannot record one channel while watching another.

Recording options are on pages 31-37.

You cannot record if DEFEAT RECORDING is set to ON. (REC DEFEATED will flash on the screen.) Details are on page 37.

If you pause a recording for more than five minutes, the TV/VCR will switch to Stop mode automatically to protect the video cassette tape from damage.

You can change the tape speed with the SPEED button while a recording is in progress, but some

distortion may appear on the tape.

Image 30
Contents CCB092AT Dear Philips product owner For Customer UseIntroduction FeaturesSafety Precautions Declaration of ConformityTable of Contents TV/VCR Maintenance Putting Batteries in the Remote ControlUsing the Remote Control Recording PreventionHook up your TV/VCR using one of the connections shown Hooking Up the TV/VCRRod Antenna supplied Crooked PinStraight Pin Hooking Up the TV/VCR cont’d Mobile ConnectionsCigarette Lighter You cannot set up channels if you are using a Cable Box Turning On the TV/VCRLanguage Selection Press the Menu buttonAutomatic Channel Setup Adding/Deleting Channels Press the PLAY/ o button or the STOP/ p button to selectSetting the Clock Manual Clock SettingCable Box users must set the clock manually Setting the Clock cont’d Setting the Clock cont’d Automatic PBS Channel SelectionWait for the TV/VCR to find the time Manual PBS Channel Selection Button Press the PLAY/ button or the STOP/ button toSelect SET PBS CH. MANUAL. Then, press the F.FWD/B Use the Number buttons to select your PBS stationDaylight-Savings Time Time Zone Front Panel DC 13.2V Jack Rear PanelANTenna Jack AC 120V JackRemote Control Buttons Remote Control Buttons cont’d Adjusting the Picture Controls Adjusting the Picture Controls cont’d Decrease IncreaseMore brilliant If you select Status ON, then select Counter only OFF If you select Status ON, then select Counter only on If you select Status OFF Reminder Press the PLAY/ button or the STOP/ button to selectPlaying VHS Quasi Play Back SqpbRecording To stop recording, press the STOP/ button Tape SpeedsOne-Touch Recording Rerecording Tape Duplication Different brands of equipment may operate differentlyTimer Recording DailyTimer Recording cont’d Time OFF To Correct Press Clear To END Press ExitTimer Recording cont’d Checking or Clearing Timer Recordings With the TV/VCR on, press the Menu buttonDefeat Recording Repeat Play Insert a tape in the TV/VCR Press the Menu button Repeat PlayB Repeat Play cont’d Press the STATUS/EXIT button to remove the menu. A-BReal-Time Counter Memory Press the STATUS/EXIT button. The real-time counter willSuper High Speed Searching LP/SLP Playback OptionsForward and Reverse Searching SP/LP/SLP Viewing a Still PictureBlue Background GroundSleep Timer Press the SLEEP/WAKE UP buttonWake Up Timer Volume Bar Automatic Operation Features Specifications Glossary Helpful Hints Helpful Hints cont’d Limited Warranty TV/VCR CombinationIndex 23-24Page Page Supplied Accessories