32 Rerecording (Tape Duplication)
AUDIO and VIDEO OUT Jacks on source unit
(VCR or Camcorder)
VIDEO AUDIO
OUT
IN
1
|
| POWER | STOP |
AUDIO | VIDEO | EJECT | |
|
| ||
|
| REC |
|
Audio Cable (white) from
AUDIO OUT to AUDIO
Video Cable (yellow) from | AUDIO and VIDEO | |
Jacks on TV/VCR | ||
VIDEO OUT to VIDEO | ||
|
Make the connections shown above, using audio and video cables. Connect the source unit (VCR or camcorder) to a power source after connections are made.
2
The source unit will play your tape. Insert a prerecorded tape in the source unit. If playback begins, press the STOP button on the unit.
3
The TV/VCR will record your tape. Insert a blank tape in the TV/VCR. Make sure the tape’s record tab is intact. The TV/VCR power will turn on automatically.
4
Point the TV/VCR remote control at the TV/VCR. Press Number buttons 0, 0 so that A/V IN appears on the screen.
5
Point the TV/VCR remote control at the TV/VCR. Press the SPEED button until the desired tape speed (SP or SLP) appears on the screen.
6
Press the PLAY button on the source unit and the REC(ord)/OTR button on your TV/VCR at the same time. Copying will begin.
7
To stop copying, press the STOP/EJECT button on the TV/VCR, then stop the tape on the source unit (VCR or camcorder).
Helpful Hints
•Unauthorized recording of copy- righted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.
•Different brands of equipment may operate differently.
•Make sure all connections are secure. Otherwise, you may not record both picture and sound.