Philips TS3659C1 manual Using the AUDIO/VIDEO Input Jacks, Connect the Video yellow

Page 31

USING THE AUDIO/VIDEO INPUT JACKS

AUDIO/VIDEO INPUTS

The TV’s Audio/Video Input jacks are for direct picture and sound connections between the TV and a VCR (or similar device) that has Audio/Video Output jacks.

BEGIN

Connect the VIDEO (yellow)

CABLE to the VIDEO IN-1 jack on the back of the TV. Then con- nect the AUDIO (red and white)

CABLES to the AUDIO (left and right) IN-1 jacks on the rear of the TV.

Connect the VIDEO (yellow)

CABLE to the VIDEO OUT jack on the back of the VCR. Then connect the AUDIO (red and white) CABLES to the AUDIO (left and right) OUT jacks on the rear of the VCR.

Turn the VCR and the TV ON.

Use the AV button on the remote to select the AV 1 chan- nel.

With the VCR ON and a prere- corded tape inserted, press the PLAY button to view the tape on the television.

NOTE: Repeatedly pressing the AV button on the remote will toggle the picture source from the current chan- nel, to the last viewed channel, then the AV 1 connection, then the AV 2 connection.

This also applies to the Multi Media button on the remote. Repeatedly pressing the Multi Media button will toggle the picture source from the current channel, to the last viewed channel, then the MM 1 (AV 1) con- nection, then the MM 2 (AV 2) con- nection.

24

AV 1

AV 2

4

POWER

SLEEP

TV	AV	STATUS/EXIT	CC	TV/VCR-CLOCK
VCR	VCR	INCREDIBLE	MULTI	A/CH
ACC	RECORD	STEREO	MEDIA

SMARTSMART

SOUNDPICTURE

MENUSURF

VOL

CH

MUTE

When using the Audio/Video IN-1input jacks, the video and sound can be viewed and heard on the AV 1 channel.

When using the Audio/Video IN-2input jacks, the video and sound can be viewed and heard on the AV 2 channel.

BACK OF TV

1

S-VIDEO

VIDEO

L

ANT "A"AUDIO

75R/MONO

IN-1OUT

VIDEO IN (YELLOW)

AUDIO IN	2
(RED/WHITE)	2
OUT	OUT ANTENNA
	IN

BACK OF VCR

R AUDIO L	VIDEO ANTENNA
	OUT
IN	IN

3

VCR

(EQUIPPED WITH VIDEO AND

AUDIO OUTPUT JACKS)

IF YOU ARE USING A

NON-STEREO DEVICE,

USE ONLY THE AUDIO

R/MONO JACK.

31

Image 31

Contents TS3659C1 Warranty Verification Safety Instructions Read before operating equipment Table of Contents Cable/Antenna FeaturesTings are at normal mid-range levels Adjusting the TV PicturePress the STATUS/EXIT but Setting the TV’S ClockTimer controls Press the Numbered buttonsPress the Menu button on Activating the TV’S on Timer ControlPress the STATUS/EXIT button Selecting the TV’S on Timer ChannelSetting the TV’S on Timer Start Time Press the Cursor Down Turning on the on Timer DisplayMovie Ratings Understanding SmartlockSmartLock control Using Smartlock Setting UP the Access CodeEnter current access code Down to highlightSelect block Using Smartlock Blocking ChannelsPress the Channel + or This stops the viewing of VCR, DVD, etcPress the STATUS/EXIT but- ton to remove the menu Using Smartlock Movie RatingEnter the correct access code number. Xxxx shows on Press the Cursor Right Button to access the movie ratingsUsing Smartlock TV Rating Options Using Smartlock BlockingBlock Unrated to on or Using Smartlock Block UnratedButton or the Cursor Left button to setRating to on or OFF Using Smartlock no RatingPress the Menu button on the remote to show the on-screen Left button to set noExample Blocking is set to OFF Reviewing the Smartlock SettingsXxxx Viewing Blocked ProgrammingPress the Cursor UP or Cursor Down buttons to Turning on the Noise Reduction ControlTrast + control Press the Cursor Right Turning on the Contrast + ControlMode Using the Closed Caption ControlGood BYE Sleep Using the Sleep Timer ControlAdjusting the TREBLE, BASS, and Balance Sound Controls Placed in the Stereo mode, the sound com Setting the TV for Stereo and SAP ProgramsRemember, if stereo is not present On a selected show and the TV is Tial Using the Incredible Stereo Control Using the Volume BAR Control RoundAudio OUT Setting the Audio OUT ControlUse the Cursor Left or Right buttons to set Use the Cursor Right or Cursor Left buttons Using the TV Speaker Control and Audio Output JacksConnect the Right and Left Press the Cursor Down button to select the SpeakersConnect the Video yellow Using the AUDIO/VIDEO Input JacksConnect the S-VIDEO Using the AUDIO/VIDEO Input Jacks CONT’DTurn the VCR or Digital Using the Smart Picture Control Press the Smart Sound but Using the Smartsound ControlUsing the Channel Surf Control Find your Three-Digit Code on pages Remote control number for yourDirect Access Method Turn on the device by press- ing the Power button on Setting the Remote Control to Operate Accessory DevicesPlace the TV/VCR/ACC Remote VCR Code no Remote Control Direct Entry CodesRemote Dvdcode no Using the REMOTE’S VCR Buttons Tips if Something Isnt Working TV Displays Wrong Channel or No Channels AboveGlossary to Television Terms Index Philips Consumer Electronics Company Texas Page Limited Warranty