CCZ256comb.QX33 4/6/99 9:14 PM Page 33
The
Before you begin, make sure:
One-Touch Recording 33
Press the STOP/EJECT but-
4 ton on the TV/VCR to stop the OTR.
●Channels are set up.
●There is a tape in the TV/VCR. The record tab must be intact.
1
Press the COMBI button, then press the CH(annel). Up/Down buttons or the Number buttons to select the channel you want to record.
2
2
3
POWER
SLEEP
REC/OTR
REW
MENU
SPEED
PLAY
STOP
STATUS/EXIT
EJECT
MEMORY
PAUSE/STILL
F.FWD
CLEAR
4
Press the SPEED button until the desired recording speed (SP, LP, or SLP) appears
1
4
7
2 | 3 |
|
|
| CH. |
5 | 6 | 1 |
8 | 9 |
3
Press the REC(ord)/OTR button repeatedly until the desired recording length appears in the upper right corner of the screen. Recording will begin immediately. The REC(ord) light will
OTR | LENGTH 0:30 |
CH12 |
|
LENGTH : PRESS OTR
CANCEL : PRESS CLEAR
4
To stop an OTR before recording is finished, press the STOP/EJECT button on the TV/VCR.
Or, press the REC(ord)/OTR button, then press the CLEAR button, then press the STOP/▼ button on the remote control.
A.CH | 0 | +100 | VOL. |
|
|
| |
CABLE/DBS | COMBI |
|
|
|
| VCR PLUS+ |
|
VAR.SLOW | /ENTER | MUTE | |
TRACKING | F.ADV | SLOW |
SMART SMART SKIP INDEX
PICTURE SOUND SEARCH SEARCH
Helpful Hints
•To check the time remaining for an OTR after the OTR has been set, press the STATUS/EXIT button.
•To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired recording length appears
•You can not pause an OTR.
•To cancel an OTR but continue recording, press the REC(ord)/OTR button, then press the CLEAR but- ton.
•You cannot record if RECORD DEFEAT is set to ON. Details are on page 43.
•You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the tape.
•If the end of the tape is reached during an OTR, recording will stop. The TV/VCR will eject the tape and shut itself off. The REC(ord) light may flash.