Philips CCX133AT warranty One Touch Recording, Otr, You can not pause an OTR

Page 30

30 One Touch Recording

The one touch recording (OTR) function allows you to program an immediate timed recording from 30 minutes to eight hours long without setting the timer.

Before you begin, make sure:

Channels are programmed.

There is a tape in the TV/VCR. The record tab must be intact.

1

Use the CHANNEL Up/Down buttons or the Number buttons to select the channel you want to record.

2

Press the (Tape) SPEED button until the desired record- ing speed (SP, LP, or SLP) appears on-screen. Details are on

page 29.

3

Press the REC(ord)/OTR button repeatedly, until the desired recording length appears in the upper right corner of the screen. Recording will begin immediately. The REC(ord) light will appear.

OTR

LENGTH 0:30

CH12

 

LENGTH : PRESS OTR

CANCEL : PRESS CLEAR

4

To stop an OTR before recording is finished, press the STOP/EJECT button on the TV/VCR.

Or, press the REC(ord)/OTR button, then press the CLEAR button, then press the STOP/button on the remote control.

 

Press the STOP/EJECT but-

 

ton on the TV/VCR to stop

4 the OTR.

 

 

 

 

 

POWER

 

 

SLEEP

 

 

 

 

2

3

ALT.CH

 

 

 

1

 

 

1

 

4

5

6

o

 

 

 

 

 

CHANNEL

2

7

8

9

p

 

 

0

+100

o

 

 

SPEED

 

MUTE

VOLUME

 

 

 

 

 

 

 

 

 

p

 

 

 

 

o

 

 

 

 

 

PLAY

 

 

 

 

– REW

 

 

F.FWD

+

 

3

 

 

STOP

 

 

 

 

 

p

 

 

 

 

REC/OTR

MEMORY PAUSE/STILL VCR PLUS+

 

 

MENU STATUS/EXIT CLEAR

SMART

 

 

 

SOUND

 

 

Helpful Hints

To check the time remaining for an OTR after the OTR has been set, press the STATUS/EXIT button.

To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired recording length appears on-screen.

You can not pause an OTR.

To cancel an OTR, but continue recording, press the REC(ord)/OTR button, then press the CLEAR button.

You cannot record if the TV/VCR is in Record Defeat mode. Details are on page 40.

You can change the tape speed with the (Tape) SPEED button while a recording is in progress, but some distortion may appear on the tape.

If the end of the tape is reached during an OTR, recording will stop. The TV/VCR will eject the tape and shut itself off. The REC(ord) light may flash.

Image 30
Contents CCX133AT Dear Philips Magnavox product owner For Customer UseFeatures Safety PrecautionsIntroduction Table of Contents VCR Maintenance Putting Batteries in the Remote ControlUsing the Remote Control Removing the Shipping CardHook up your TV/VCR using one of the connections shown Hooking Up The TV/VCRRod Antenna Crooked Pin Straight Pin Hooking Up The TV/VCR cont’dBent pin Cable PlugTurning On the TV/VCR Language Selection Press the Menu button to display the pop up menuChannel Memory Enter the channel number you want to add or delete Adding/Deleting ChannelsPress the Number 3 button to select ADD/DELETE Channel Press the Menu buttonChannels are programmed. Details are on pages 10 Setting the ClockManual Clock Setting Press the Number 6 button to select SET ClockSetting the Clock cont’d Press the Number 2 button to select SET Manual ClockSetting the Clock cont’d Automatic PBS Channel SelectionPress the Menu button to display the pop up menu Wait for the TV/VCR to find TimePress the Number 1 button to select SET PBS CH Manual PBS Channel Selection Find the time Use the Number buttons to select your PBS stationNOW Searching flashes on the TV/VCR screen Daylight-Saving Time Press the PLAY/ button or the STOP/ button to selectTime Zone Press the Number 4 button to select SET Time ZoneYou cannot select Time Zone at if Auto Clock is set to OFF Front Panel Connect your antenna or cable here Rear PanelANTenna Jack Details are on pages six sevenRemote Control Buttons Channel Up/Down Buttons Volume Up/Down ButtonsALT. CH Alternate Channel Button Mute ButtonAdjusting the Picture Controls Decrease Increase Decreased brightnessPress the REWind/- button to decrease a picture control On Mode On-Screen Status DisplaysReminder Playing Press the RECord/OTR button once to start recording RecordingSpeed are given below Recording options are on pages 30One Touch Recording OTRYou can not pause an OTR Rerecording Tape Duplication Different brands of equipment may operate differentlyAudio and video cables are not included Timer Recording Select a once, daily or weekly recordingTimer Recording cont’d Timer Recording cont’d Checking or Clearing Timer Recordings Setting Up the VCR Plus+ Programming System TV Channels Cable ChannelsLocal TV Stations Call letters Examine the lists on Press the Number 5 button to select VCR PLUS+ REF. MAPPress the STATUS/EXIT button to exit Press the VCR PLUS+ button on the remote control. The on Screen display shown below will appearTimer Recording With the VCR Plus+ Programming System cont’d Record Defeat Record DefeatFollow the steps below to prevent accidental recording Setting the Sleep Timer If the power fails, you might lose the sleep timer settingMenu Closed CaptioningExample ScreenClosed Captioning cont’d Standard Closed CaptioningText Screen To turn Volume Bar On or Off Volume Bar / Smart SoundVolume Bar Smart SoundRepeat Playback B Repeat Playback Insert a tape in the TV/VCRRepeat Playback cont’d Appear on-screen Button to reset the real time counter to zeroReal Time Counter Memory While the counter remains on-screen, press the ClearAutomatic Operation Features Super High Speed Searching LP/SLP Playback OptionsForward and Reverse Searching SP/LP/SLP Viewing a Still PictureSpecifications GlossaryHelpful Hints Helpful Hints cont’d Limited Warranty Please contact Philips at French Speaking English SpeakingModel # Serial # Index Supplied Accessories