Philips CCX133AT warranty Helpful Hints cont’d

Page 53

Helpful Hints (cont’d) 53

TV/VCR has no power.

• Make sure the power plug is completely connected to an AC (alternating current) outlet.

A power failure occurred.

•Follow the steps on page eight to select a language and program channels, if necessary. Then set the clock (pages 12 - 17).

TV/VCR power shuts off after 15 minutes.

•To save energy, the TV/VCR will shut itself off after 15 minutes when it is on a channel that is not receiving a broadcast signal (for example, a station that has gone off the air for the night). This is normal.

Channel reception is poor.

• Check connections, then program channels again (page 10).

TV/VCR does not have a picture.

•Adjust the antenna (pages six - seven).

•Connect the antenna or cable directly to the TV/VCR.

•Adjust the TV/VCR picture controls (pages 24 - 25).

TV/VCR has poor sound or no sound.

•Adjust the volume.

•Press the MUTE button to restore the volume.

Tape playback is poor or tape is destroyed.

•Adjust the tracking. Details are on page 49.

•If moisture has accumulated in your TV/VCR, keep the power on for at least two hours, but do not try to play a tape. Details are on page 52.

TV/VCR does not display closed captioning.

•Cancel Counter Only mode. Details are on page 26.

•Make sure closed captioning is available for the program. Refer to the TV listings in your local newspa- per.

Remote control does not operate TV/VCR.

•Aim the remote control directly at the TV/VCR’s remote sensor. Details are on pages five and 20.

•Remove all obstacles between the remote control and the TV/VCR.

•Inspect and replace the batteries in the remote control. Details are on page five.

Number buttons won’t work for channels above 69.

•Select CABLE from the INPUT section of the pop up menu, then let the TV/VCR program the channels. Details are on page 10.

TV/VCR can’t receive channels above 13.

•Select CABLE from the INPUT section of the pop up menu, then let the TV/VCR program the channels. Details are on page 10.

A tape can’t be inserted into the TV/VCR.

•Insert the tape window side up, with the record tab facing you.

•Make sure a tape isn’t already in the TV/VCR by pressing the STOP/EJECT button on the TV/VCR.

•Gently push on the center of the tape. Never force a tape into the TV/VCR.

A tape can’t be removed from the TV/VCR.

•Make sure the power plug is completely connected to an AC (alternating current) outlet.

•If a timer recording is programmed, turn on the TV/VCR power, then eject the tape. Be sure to insert a tape and turn off the TV/VCR power for the timer recording.

TV/VCR ejects the tape when you try to start a recording.

• Make sure the tape has a record tab. Details are on page five.

The cylinder rotates when the TV/VCR is in Stop mode.

• To enable the quick play mechanism, the cylinder will rotate for about five minutes. This is normal.

Daylight-Saving Time

•When Daylight-Saving Time is ON, the clock time will change automatically as follows: on the first Sunday of April, from 2 a.m. to 3 a.m.; on the last Sunday of October, from 2 a.m. to 1 a.m.

•When programmed timer recordings start between 2 a.m. and 2:59 a.m. on the first Sunday of April, the TV/VCR will start recording at 3 a.m. (summer time).

•When programmed timer recordings end between 2 a.m. and 2:59 a.m. on the first Sunday of April, the TV/VCR will stop at 3 a.m.

•When using this feature, a program that occurs during the spring time change may not record complete- ly. Adjust the start and stop times accordingly.

Page 52 Page 54
Image 53
Page 52 Page 54
Contents CCX133AT For Customer Use Dear Philips Magnavox product ownerIntroduction FeaturesSafety Precautions Table of Contents Using the Remote Control Putting Batteries in the Remote ControlVCR Maintenance Removing the Shipping CardRod Antenna Hook up your TV/VCR using one of the connections shownHooking Up The TV/VCR Bent pin Hooking Up The TV/VCR cont’dCrooked Pin Straight Pin Cable PlugTurning On the TV/VCR Press the Menu button to display the pop up menu Language SelectionChannel Memory Press the Number 3 button to select ADD/DELETE Channel Adding/Deleting ChannelsEnter the channel number you want to add or delete Press the Menu buttonManual Clock Setting Setting the ClockChannels are programmed. Details are on pages 10 Press the Number 6 button to select SET ClockPress the Number 2 button to select SET Manual Clock Setting the Clock cont’dPress the Menu button to display the pop up menu Setting the Clock cont’dAutomatic PBS Channel Selection Press the Number 1 button to select SET PBS CH Wait for the TV/VCR to findTime Manual PBS Channel Selection NOW Searching flashes on the TV/VCR screen Find the timeUse the Number buttons to select your PBS station Press the PLAY/ button or the STOP/ button to select Daylight-Saving TimeYou cannot select Time Zone at if Auto Clock is set to OFF Time ZonePress the Number 4 button to select SET Time Zone Front Panel ANTenna Jack Rear PanelConnect your antenna or cable here Details are on pages six sevenRemote Control Buttons ALT. CH Alternate Channel Button Volume Up/Down ButtonsChannel Up/Down Buttons Mute ButtonAdjusting the Picture Controls Press the REWind/- button to decrease a picture control Decrease IncreaseDecreased brightness On-Screen Status Displays On ModeReminder Playing Speed are given below RecordingPress the RECord/OTR button once to start recording Recording options are on pages 30You can not pause an OTR One Touch RecordingOTR Audio and video cables are not included Rerecording Tape DuplicationDifferent brands of equipment may operate differently Select a once, daily or weekly recording Timer RecordingTimer Recording cont’d Timer Recording cont’d Checking or Clearing Timer Recordings Local TV Stations Call letters Setting Up the VCR Plus+ Programming SystemTV Channels Cable Channels Press the STATUS/EXIT button to exit Examine the lists onPress the Number 5 button to select VCR PLUS+ REF. MAP Screen display shown below will appear Press the VCR PLUS+ button on the remote control. The onTimer Recording With the VCR Plus+ Programming System cont’d Follow the steps below to prevent accidental recording Record DefeatRecord Defeat If the power fails, you might lose the sleep timer setting Setting the Sleep TimerExample Closed CaptioningMenu ScreenText Screen Closed Captioning cont’dStandard Closed Captioning Volume Bar Volume Bar / Smart SoundTo turn Volume Bar On or Off Smart SoundRepeat Playback Insert a tape in the TV/VCR B Repeat PlaybackRepeat Playback cont’d Real Time Counter Memory Button to reset the real time counter to zeroAppear on-screen While the counter remains on-screen, press the ClearAutomatic Operation Features Forward and Reverse Searching SP/LP/SLP Playback OptionsSuper High Speed Searching LP/SLP Viewing a Still PictureGlossary SpecificationsHelpful Hints Helpful Hints cont’d Model # Serial # Limited WarrantyPlease contact Philips at French Speaking English Speaking Index Supplied Accessories
Top Page Image Contents