Philips DV900VHS owner manual Checking or Cancelling Timer Recordings, See page 78 for more hints

Timer Recording (cont’d) 39

Checking or Cancelling Timer Recordings

●Before you begin, place the DVD/VCR in VCR mode.

Press the DVD/VCR OUTPUT button so that the VCR light appears on the front of the DVD/VCR.

1

With the DVD/VCR on and in VCR mode and in VCR position (press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR), press the VCR button, then press the MENU button.

2-4

POWER		TIMER SET
VCR/TV	DVD/VCR	MEMORY
	OUTPUT		1
DVD	PLAY	VCR
REW		F.FWD
	STOP
CHANNEL		RD
		RECO

2

SKIP

PAUSE

1 2 3

Press the PLAY button or the STOP button to select	5	4
PROGRAM, then press the F.FWD button.
3		7
		SPEED
		SEARCH MODE
Press the PLAY button or the STOP button to select		TIME SEARCH
PROGRAM REVIEW, then press the F.FWD button. The
timer recording information for the program in the lowest num-
bered slot will appear on the screen. If no timer recordings are
set, nothing will happen when you press the F.FWD button.

5	6
8	9	SLOW
		A B
	+10
0
DISPLAY	CLEAR
STATUS/EXIT		REPEAT	1
	MENU	TITLE
	ENTER	RETURN

4

Press the F.FWD button repeatedly to review all pro- grammed timer recordings. If you don’t press the F.FWD but- ton within 10 seconds, the DVD/VCR will automatically display information about the next programmed timer recording. This will continue until all timer recordings have been displayed. Then the menu will disappear.

5

To cancel the timer recording displayed, press the CLEAR button. Either the display will disappear or information about other timer recordings will appear. If you do not press any other buttons, the display will disappear after all timer recordings have been displayed.

6

Repeat steps 1-4 to make sure you have cleared the cor- rect timer recording.

Helpful Hints

•CLASH may flash on the screen when you finish setting a timer recording. This means that the timer recording you just programmed and another timer recording overlap. The current timer recording will not take place. You may choose to cancel the over- lapping timer recording.

•To stop a started timer recording, press the STOP/EJECT button or the TIMER SET button on the front of the DVD/VCR.

•If the power fails for more than one minute, programmed timer recordings will be lost. If this occurs, repeat the steps on pages 16 and 20 before resetting the timer recordings.

•If the preset time for a timer record- ing comes up during an OTR, the OTR has priority. A message will remind you when the timer recording was scheduled to begin. You may let the OTR continue; the timer recording will not take place. Or, stop the OTR and press the TIMER SET button immediately. The timer recording will take place if you press the TIMER

SET button before the timer record- ing’s scheduled start time.

See page 78 for more hints.