Philips DV900VHS If you select Status ON, then select Counter only on, If you select Status OFF

On-Screen Status Displays (VCR) 23

A status display will appear when you press the DISPLAY/STATUS/EXIT button or certain function buttons. The contents of the status display will vary. To choose the status display mode, follow the steps below.

●Before you begin, place the DVD/VCR in VCR mode. Press the DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR. Press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR.

Receiving and Recording Mode

If you select STATUS ON, then select COUNTER ONLY ON:

●Whenever you press the STOP button or the PLAY button, the status display will appear for five seconds. After five seconds, only the counter will remain on the screen. You must press the DIS- PLAY/STATUS/EXIT button to remove it. Portions of the status display also may appear when you press other function buttons.

If you select STATUS ON, then select COUNTER ONLY OFF:

● Whenever you press the STOP button or the PLAY button, the

status display will appear for five seconds. Portions of the status

Current status of tape

STOP

TV STEREO

Channel

Time

12:00 AM CH10

STEREO 2ND AUD

display also may appear when you press other function buttons.

If you select STATUS OFF:

●The status display will not appear when you press function but- tons. You must press the DISPLAY/STATUS/EXIT button to see the status display.

1

Press the MENU button.

SLP M 1:23:45 HIFI

Tape	Counter	Audio Out Mode
Speed	and
	Counter	MTS
	Memory
		Broadcast
		Available

2

Press the PLAY button or the STOP button to select VCR SET UP, then press the F.FWD button.

3

Press the PLAY button or the STOP button to select ON SCREEN MODE, then press the F.FWD button.

4

Press the PLAY button or the STOP button to select STA- TUS, then press the F.FWD button so that OFF (or ON) appears beside STATUS.

SELECT op CHOOSE B

→ STATUS	[ON]
COUNTER ONLY	[OFF]

TO END PUSH EXIT

5

If you set STATUS to OFF, go to step 6. If you set STATUS to ON, press the PLAY button or the STOP button to select COUNTER ONLY, then press the F.FWD button so that OFF (or ON) appears beside it.

6

Press the DISPLAY/STATUS/EXIT button.

Helpful Hints

•You may not access a status display when viewing a still picture, during slow motion playback, or during for- ward or reverse searching.

•The status display may not appear if a weak channel is selected and BLUE BACKGROUND is set to OFF. Details are on page 49.