6.3 TIMER RECORD SET UP Menu
This VCR can be programmed to record up to 8 different programs. The TIMER RECORD SET UP option can be programmed ON or OFF, the start/end times, the day of the week and the recording speed can be set. Options are:
SET - ON/OFF. Allows you to define the timer recording and select the option on or off.
START - Sets the start time of recording. END - Sets the stop time of recording.
DAY - Sets the day of the timer recording. Options are: SUN ~ SAT: Same time once a week.
DLY: Same time(s) for every day
SPD - Sets the recording time mode. Options are: 6H, 18H, 30H, etc.
1. Press the MENU button and the main menu will | MENU |
| |
appear. |
|
|
|
MAIN MENU
| < MENU > |
|
| LANGUAGE | ENGLISH |
| CLOCK SET UP |
|
| RECORD MODE SET UP | |
| TIMER RECORD SET UP | |
| REVIEW MODE |
|
| SEARCH SET UP |
|
| SYSTEM SET UP |
|
[↓ | →] | [END:MENU] |
2.Press the ↓ button to choose the TIMER RECORD SET UP option and press the → button to enter the menu.
The TIMER RECORD SET UP menu will appear. You can now setup the timer recording.
TIMER RECORD MODE
| SET | START | END | DAY | SPD |
| OFF | - | A6 | ||
| OFF | - | A6 | ||
| OFF | - | A6 | ||
| OFF | - | A6 | ||
| OFF | - | A6 | ||
| OFF | - | A6 | ||
| OFF | - | A6 | ||
| OFF | - | A6 | ||
[↓ | →] | [CLEAR] | [END:MENU] |
3.Press the ↓ button to move the first available SET option (or the SET option you want to change).
4.Press the → button and the SET item will flash. Press the + or – button to choose ON or OFF.
5.Press the → button to move next item (day, start time, end time recording hour) and repeat the process by using the +, – and → buttons.
Note: If you are finished programming and you want to set the VCR to record the programs you have entered.
MAKE SURE YOU HAVE INSERTED A TAPE INTO THE VCR.
THE POWER BUTTON MUST BE SWITCHED TO OFF BEFORE THE VCR WILL RECORD ANY TIMER PROGRAMS. (TIMER appears).
The VCR is now set to record the preset programs.
6.4 REVIEW MODE Menu
The REVIEW MODE enables you to display on the monitor screen the alarm events, power failures, and to set the buzzer options. You can also clear any alarms or power failure events.
1. Press the MENU button and the main menu will | MENU |
| |
appear. |
|
|
|
MAIN MENU
| < MENU > |
|
| LANGUAGE | ENGLISH |
| CLOCK SET UP |
|
| RECORD MODE SET UP | |
| TIMER RECORD SET UP | |
| REVIEW MODE |
|
| SEARCH SET UP |
|
| SYSTEM SET UP |
|
[↓ | →] | [END:MENU] |
2.Press the ↓ button to select the REVIEW MODE option and then press the → button to enter the menu.
The REVIEW MODE menu will appear.
REVIEW MODE
| < REVIEW MODE > | |
| ALARM REVIEW |
|
| POWER FAIL REVIEW | |
| BUZZER SELECT |
|
| ELAPSED TIME: 00000HR | |
[↓ | →] | [END:MENU] |
ALARM REVIEW: Allows you to view alarm events and then clear the alarm.
3.Press the ↓ button to choose the ALARM REVIEW option and then press the → button.
ALARM REVIEW menu will appear.
|
| < ALARM REVIEW > | ||
1 | - | - | ||
2 | - | - | ||
3 | - | - | ||
4 | - | - | ||
5 | - | - | ||
6 | - | - | ||
7 | - | - | ||
8 | - | - | ||
[↓ | →] | [CLEAR] | [END:MENU] |