Philips SVA106 owner manual Automatic Channel Setup

12 Automatic Channel Setup

Although your VCR may automatically set up the channels you receive when you turn it on for the first time, this function lets you set up channels again. Make sure:

●The VCR is on and is in VCR position. (The VCR/TV light will appear on the display panel. If it does not, press the VCR/TV button once.)

1

Press the MENU button repeatedly until the INITIALIZE menu appears.

INITIALIZE

→CHANNEL SET UP SETTING CLOCK LANGUAGE SELECT

2

Press the PLAY button or the STOP button repeatedly to select CHANNEL SET UP. Then, press the F.FWD but- ton.

CHANNEL SET UP

→AUTO TUNING ADD/DELETE CH

3

Press the PLAY button or the STOP button repeatedly to select AUTO TUNING.

4

Press the F.FWD button. The VCR will memorize all available channels. When setup is complete, the lowest channel you receive will appear on the screen.

POWER VCR/TV EJECT

1 2 3

4 5 6

7 8 9 CHANNEL

	SPEED	0	+100
	SLOW	QUICK-	SEARCH
			TIME	INDEX
		FIND
1
	MENU	DISPLAY	EXIT	COUNTER	2
			RESET	MEMORY
	REWIND	/ PLAY		F.FWD
	RECORD		/ STOP	PAUSE/STILL

34

Helpful Hints

•Line Input mode will always be stored in the VCR’s memory as channel 001 or 002. When you select channel 001 or 002 with the Number buttons, L1 (the rear audio and video input jacks) or L2 (the front audio and video input jacks) will appear on the screen.

You may also select L1 or L2 with the CHANNEL o/p buttons.

•You can not program channels if you are using a Cable Box/DBS. Details are on pages eight-nine.