Yamaha MCX-CA15 owner manual Input level sensing function, Reset button

Input level sensing function

In “B” mode, the MCX-CA15 automatically activates (exits sleep mode) when its circuitry senses a signal input from an external source connected to the AUDIO IN jack.

You can use INPUT SENSE to change the detectable signal threshold.

Turn INPUT SENSE to the right to increase the detectable signal threshold.

Turn INPUT SENSE to the left to decrease the detectable signal threshold.

INPUT SENSE

Notes

•If no input source is detected for five minutes or longer, this function automatically switches the MCX-CA15 to sleep mode.

•In sleep mode, output from the MCX-CA15 is muted.

•If you turn INPUT SENSE all the way to the left, the MCX-CA15 always remains in the active state. If you turn it all the way to the right, the MCX-CA15 always remains in sleep mode.

•This function is only available when the MCX-CA15 is set to “B” mode.

OPERATION

RESET button

The RESET button is located on the inside front panel.

RESET

A B C

MODE

RESET

INPUT SENSE

Press the RESET button to restart the MCX-CA15 only if:

•The MCX-CA15’s protection circuitry has been activated and the unit has switched itself off.

•You have changed the operation mode using the MODE switch.

Note

When the MCX-CA15 is connected to a client and

you want to reset the system, press and hold on the client for ten seconds.

USING THE MCX-CA15

11