Philips SVZ162 On-Screen Status Displays, OFF mode Press the Display button once. Count mode

Page 17

SVZ162 LAYOUT 4/7/99 6:41 PM Page 17

On-Screen Status Displays 17

You may access on-screen status displays by pressing the DISPLAY button repeatedly. On-screen status displays may include the current time, channel, and other information.

●Press the DISPLAY button once. The COUNT on-screen status display will appear for five seconds. After five seconds, only the real-time counter will appear on-screen. This counter shows you the elapsed play- ing time of the tape (from the point at which the real-time counter was set to zero).

●Press the DISPLAY button once again. The CLOCK on-screen status display will appear for five seconds. After five seconds, only the current time will appear on-screen (the clock must be set). (If you are watching TV, the current channel number and the availability of stereo or second audio will also appear on-screen.)

●Press the DISPLAY button once again. The on-screen status display will disappear.

<OFF mode>

Press the DISPLAY button once. <COUNT mode>

STOP

				This indicates that HIFI has been selected at the AUDIO
				This indicates that HIFI has been selected at the AUDIO
				OUT menu (see page 44 for details). If you play non-Hi-Fi
				tapes while the VCR is set to HIFI, or if MONO has been

SLP	0:12:34	HIFI selected at the AUDIO OUT menu, HIFI will not appear
				on the status display.

Press the DISPLAY button once. <CLOCK mode>

STOP	5:40 PM
	CH 02
	STEREO
	SAP
SLP

Press the DISPLAY button once.

Helpful Hints

•If the channel you select has no broadcast, the screen will be solid blue.

•You may bring up a status display at any time by pressing the DIS- PLAY button. (The exception is when viewing a still picture or a slow motion picture, or when F.FWD or REWIND is pressed dur- ing playback.)

•Channel numbers (when tuned) appear on-screen for a few seconds.

Image 17

Contents Video Cassette Recorder For Customer Use Warranty VerificationIntroduction FeaturesSafety Precautions Table of Contents Putting Batteries in the Remote Control Before Using Your VCRUsing the Remote Control VCR maintenanceDisconnect the antenna or cable from your TV Hookups Without a Cable Box / Direct Broadcast SystemCH3 Plug in the TV and the VCRRecording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast SystemConnections Recording One Channel/Watching Another Hookups With a Cable Box / Direct Broadcast System cont’dHookups With a Stereo TV 2Turn on the TV Turning on Your VCRAutomatic Channel Setup Adding/Deleting Channels Automatic Channel Setup cont’dFollow the steps below to set your VCR’s clock. Make sure Setting the ClockSetting the Clock cont’d Language Selection Press the Counter RESET/EXIT button to exitPress the Display button once. Clock mode OFF mode Press the Display button once. Count modeOn-Screen Status Displays Press the Display button onceRemote Control Buttons Eject Button Counter RESET/EXIT ButtonTime Search Button Index Search ButtonVCR Display Panel Front Panel Rear Panel AC Power CordAudio OUT Jacks Video OUT JackRead and follow the steps below to play a tape Playing1Turn on the TV Insert a tape RecordingStopping an OTR One-Touch RecordingStarting an OTR Program Number → Once Daily Weekly Timer RecordingRepeat the procedure in to set the recording’s end time Timer Recording cont’dPress the Counter RESET/EXIT button Timer recording. Details are on page eightCorrecting a Timer Recording Cancelling a Timer RecordingAuto Return Auto Satellite Link Using a Satellite Tuner Recording One Channel/Watching Another Press the VCR/TV button on the VCR remote control toTo return to the channel being recorded, use the TV Put the VCR in VCR position. The VCR/TV light will appearVCR Rerecording Tape DuplicationRepeat Play Forward and Reverse Searching SP/LP/SLP Special Effects PlaybackSuper High Speed Searching LP/SLP Viewing a Still PictureMenu will disappear, and Rental on or Rental Rental PlayOFF will appear on-screen for five seconds. Each press F.FWD button within five seconds will turn RentalPress the Play button to watch the tape Real-Time Counter MemoryIndex Search Time Search is not available during recording Time SearchTo resume normal tape playback, press the Play button Quick FindAutomatic Playback Features Understanding On-Screen Displays MTS Broadcast Stereo SystemMTS Broadcast Stereo System cont’d VCR SET UP Satellite LinkUP menu appears Hi-Fi Stereo Sound SystemCable Box/DBS Output Channel Channel 3 or GlossaryHelpful Hints Helpful Hints cont’d Specifications Video Cassette Recorder Limited WarrantyAutomatic IndexSVZ162 Layout 4/7/99 642 PM Supplied Accessories