Philips SVZ162 owner manual Rerecording Tape Duplication, Vcr

Page 33

SVZ162 LAYOUT 4/7/99 6:41 PM Page 33

Rerecording (Tape Duplication) 33

1.Audio cables from AUDIO OUT Jacks of VCR 1 to AUDIO IN Jacks of VCR 2

VCR 1

 

 

Playing VCR

 

 

AUDIO

ANT

IN

 

L

 

 

OUT

IN

 

 

R

 

VIDEO

OUT

OUT

IN CH3

CH4

VCR 2 - Recording VCR

AUDIO

ANT

IN

 

L

 

 

OUT

IN

 

 

R

 

VIDEO

OUT

OUT

IN CH3

CH4

2.Video cable from VIDEO OUT Jack of VCR 1 to VIDEO IN Jack of VCR 2

1

VCR 1 will play your tape. Insert a prerecorded tape in VCR 1. If the tape does not have a record tab, playback begins. If this happens, press the STOP/EJECT button on VCR 1 once.

2

VCR 2 will record your tape. Insert a blank tape in VCR 2. Make sure the record tab is intact (details are on page five). Make sure the VCR 2 power is on and VCR 2 is in VCR position. (The VCR/TV light will appear. If it does not, press the VCR/TV button once.)

3

Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on VCR 2 is set to.

4

Point the remote control at VCR 2. Press the Number buttons 0, 0. AUX will appear on-screen.

3.RF coaxial cable from VCR’s OUT Jack to TV’s

ANTENNA IN

Jack

5

Point the remote control at VCR 2. Use the SPEED but- ton to select SP, LP, or SLP.

6

Press the PLAY button on VCR 1 and the REC(ord)/OTR button on VCR 2 at the same time.

7

To stop recording, press the STOP/EJECT button on VCR 2 once, then stop the tape on VCR 1.

Helpful Hints

Unauthorized recording of copy- righted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.

Audio and video cables are not sup- plied.

The illustration uses two VCRs just like yours. Different VCRs may oper- ate differently.

Image 33
Contents Video Cassette Recorder For Customer Use Warranty VerificationFeatures Safety PrecautionsIntroduction Table of Contents Putting Batteries in the Remote Control Before Using Your VCRUsing the Remote Control VCR maintenanceDisconnect the antenna or cable from your TV Hookups Without a Cable Box / Direct Broadcast SystemCH3 Plug in the TV and the VCRHookups With a Cable Box / Direct Broadcast System ConnectionsRecording/Viewing Any Channel Recording One Channel/Watching Another Hookups With a Cable Box / Direct Broadcast System cont’dHookups With a Stereo TV 2Turn on the TV Turning on Your VCRAutomatic Channel Setup Adding/Deleting Channels Automatic Channel Setup cont’dFollow the steps below to set your VCR’s clock. Make sure Setting the ClockSetting the Clock cont’d Language Selection Press the Counter RESET/EXIT button to exitPress the Display button once. Clock mode OFF mode Press the Display button once. Count modeOn-Screen Status Displays Press the Display button onceRemote Control Buttons Eject Button Counter RESET/EXIT ButtonTime Search Button Index Search ButtonVCR Display Panel Front Panel Rear Panel AC Power CordAudio OUT Jacks Video OUT JackRead and follow the steps below to play a tape Playing1Turn on the TV Insert a tape RecordingOne-Touch Recording Starting an OTRStopping an OTR Program Number → Once Daily Weekly Timer RecordingRepeat the procedure in to set the recording’s end time Timer Recording cont’dPress the Counter RESET/EXIT button Timer recording. Details are on page eightCorrecting a Timer Recording Cancelling a Timer Recording Auto Return Auto Satellite Link Using a Satellite Tuner Recording One Channel/Watching Another Press the VCR/TV button on the VCR remote control toTo return to the channel being recorded, use the TV Put the VCR in VCR position. The VCR/TV light will appearVCR Rerecording Tape DuplicationRepeat Play Forward and Reverse Searching SP/LP/SLP Special Effects PlaybackSuper High Speed Searching LP/SLP Viewing a Still PictureMenu will disappear, and Rental on or Rental Rental PlayOFF will appear on-screen for five seconds. Each press F.FWD button within five seconds will turn RentalPress the Play button to watch the tape Real-Time Counter MemoryIndex Search Time Search is not available during recording Time SearchTo resume normal tape playback, press the Play button Quick FindAutomatic Playback Features Understanding On-Screen Displays MTS Broadcast Stereo SystemMTS Broadcast Stereo System cont’d VCR SET UP Satellite LinkUP menu appears Hi-Fi Stereo Sound SystemCable Box/DBS Output Channel Channel 3 or GlossaryHelpful Hints Helpful Hints cont’d Specifications Video Cassette Recorder Limited WarrantyAutomatic IndexSVZ162 Layout 4/7/99 642 PM Supplied Accessories