Philips SVZ162 owner manual Recording, 1Turn on the TV Insert a tape

Page 24

SVZ162 LAYOUT 4/7/99 6:41 PM Page 24

24 Recording

Read and follow the steps below to record a television program.

1

Turn on the TV; set it to channel 3 or 4, whichever the CH3/CH4 switch on the back of the VCR is set to.

2

Insert a tape with its record tab intact (see page five) in the VCR. The POWER, VCR/TV, and CST.IN lights will appear.

3

If the VCR/TV light does not appear, press the VCR/TV button so that the VCR/TV light appears.

4

Press the SPEED button until the desired tape speed appears on-screen. The tape speed will disappear after about five seconds.

You can change the tape speed while the VCR is recording, but some distortion may appear on the tape. Details about tape speed are on page 45.

5

Use the CHANNEL o/p buttons or the Number buttons to select the channel to be recorded.

6

Press the RECORD button once to start recording. The REC(ord) light will appear. If the tape is missing the record tab, the VCR will eject the tape.

7

To pause the recording (for example, during commer- cials), press the PAUSE/STILL button once. The REC(ord) light will flash.

To resume recording, press the RECORD button or the PAUSE/STILL button again. The REC(ord) light will appear.

8

Press the STOP button to stop recording.

1Turn on the TV.

2 Insert a tape.

3	POWER		VCR/TV	EJECT	5
	1	2	3
	4	5	6
	7	8	9	CHANNEL
4	SPEED	0	+100
	SLOW	QUICK-	SEARCH
		QUICK-	TIME	INDEX
		FIND	TIME	INDEX
	MENU	DISPLAY	EXIT	COUNTER
			RESET	MEMORY	7
6	REWIND	/ PLAY		F.FWD
6	RECORD		/ STOP	PAUSE/STILL
	RECORD		/ STOP	PAUSE/STILL

8

Helpful Hints

•Other recording options are on pages 25 - 33.

•The VCR will record in a preset vol- ume.

•Pause mode will automatically switch to Stop mode after five min- utes to protect the VCR and the tape from damage. When a record- ing is paused, you may review the time remaining with the ■ marks on-screen. Each ■ mark equals one minute remaining. During the last minute of paused recording, the ■ mark will flash.

•If any menu is activated on the TV screen, the RECORD button on the remote control does not function.

Press the COUNTER RESET/EXIT button to remove the menu. Then, press the RECORD button.

Image 24

Contents Video Cassette Recorder Warranty Verification For Customer UseFeatures Safety PrecautionsIntroduction Table of Contents Before Using Your VCR Putting Batteries in the Remote ControlUsing the Remote Control VCR maintenanceHookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TVPlug in the TV and the VCR CH3Hookups With a Cable Box / Direct Broadcast System ConnectionsRecording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast System cont’d Recording One Channel/Watching AnotherHookups With a Stereo TV Turning on Your VCR 2Turn on the TVAutomatic Channel Setup Automatic Channel Setup cont’d Adding/Deleting ChannelsSetting the Clock Follow the steps below to set your VCR’s clock. Make sureSetting the Clock cont’d Press the Counter RESET/EXIT button to exit Language SelectionOFF mode Press the Display button once. Count mode Press the Display button once. Clock modeOn-Screen Status Displays Press the Display button onceRemote Control Buttons Counter RESET/EXIT Button Eject ButtonTime Search Button Index Search ButtonVCR Display Panel Front Panel AC Power Cord Rear PanelAudio OUT Jacks Video OUT JackPlaying Read and follow the steps below to play a tapeRecording 1Turn on the TV Insert a tapeOne-Touch Recording Starting an OTRStopping an OTR Timer Recording Program Number → Once Daily WeeklyTimer Recording cont’d Repeat the procedure in to set the recording’s end timeTimer recording. Details are on page eight Press the Counter RESET/EXIT buttonCancelling a Timer Recording Correcting a Timer RecordingAuto Return Auto Satellite Link Using a Satellite Tuner Press the VCR/TV button on the VCR remote control to Recording One Channel/Watching AnotherTo return to the channel being recorded, use the TV Put the VCR in VCR position. The VCR/TV light will appearRerecording Tape Duplication VCRRepeat Play Special Effects Playback Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still PictureRental Play Menu will disappear, and Rental on or RentalOFF will appear on-screen for five seconds. Each press F.FWD button within five seconds will turn RentalReal-Time Counter Memory Press the Play button to watch the tapeIndex Search Time Search Time Search is not available during recordingQuick Find To resume normal tape playback, press the Play buttonAutomatic Playback Features MTS Broadcast Stereo System Understanding On-Screen DisplaysVCR SET UP Satellite Link MTS Broadcast Stereo System cont’dHi-Fi Stereo Sound System UP menu appearsGlossary Cable Box/DBS Output Channel Channel 3 orHelpful Hints Helpful Hints cont’d Specifications Limited Warranty Video Cassette RecorderIndex AutomaticSVZ162 Layout 4/7/99 642 PM Supplied Accessories