Philips VRX364AT warranty Setting the Clock, Manual Clock Setting

14 Setting the Clock

There are two ways to set the clock. With manual clock setting, you tell the VCR the current time. With automatic clock setting, the VCR gets the current time from your local PBS station. It keeps track of the time by constantly referring to the time broad- casted by your PBS station.

If you are using a Cable Box or Digital Satellite System, you must set the clock manually.

Follow the instructions under either manual clock setting or auto- matic clock setting (page 16) to set the VCR’s clock. Before you begin, make sure:

●The VCR is hooked up and turned on, and channels are pro- grammed into the VCR’s memory (see pages six - 12).

●The VCR is in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.)

●You make each entry within 60 seconds of the previous entry. (If you do not, you may start again at step 1.)

Manual Clock Setting

1

Press the VCR button.

2

Press the MENU button to bring up the main menu display.

TO SELECT PUSH NO. SHOWN

1PROGRAM

2VCR SET UP

3TUNER SET UP

4SET CLOCK

TO END PUSH EXIT

3

Press the Number 4 button to select SET CLOCK.

SET CLOCK	[ON]
1 AUTO CLOCK
2 SET MANUAL CLOCK	[ON]
3 DAYLIGHT SVG TIME
4 SET TIME ZONE
(AUTO)

CABLE BOX USERS

SET CLOCK MANUALLY

TO SELECT PUSH NO. SHOWN

TO END PUSH EXIT

4

Press the Number 2 button to select SET MANUAL CLOCK.

TIME – – : – –

DATE – – / – – /– –

TO END PUSH EXIT

	POWER	EJECT
		SLOW
	PAUSE/STILL
	PLAY
–	REW	F.FWD +
	STOP
2	STATUS/EXIT	CLEAR
		MENU
	SPEED	MEMORY

REC/OTRJOG&

SHUTTLE

1	VCR	TV	CBL/DSS MUTE	4
3	1	2	3
			VOLUME
	4	5	6
	7	8	9
			CHANNEL
		0	+100
	VCR PLUS+
	/ENTER
		TIME	VAR. SLOW
	VCR/TV SEARCH

Helpful Hints

•To display the time on-screen, press the STATUS/EXIT button. A status display, which includes the time, will appear on the TV screen for about five seconds. For details, see “On- Screen Status Displays” on page 29.

•If you press the STATUS/EXIT but- ton while you are setting the clock, the TV screen will return to the pro- gram you were watching. If this happens, start over.

•Power failures that last for more than one minute can cause you to lose your clock setting if you set the clock manually. If this happens, reset the clock.

•If the clock is not set, - - : - - will appear on the display panel. The time will appear on the display panel when the clock is set.