Philips VRB612AT, VRB412AT owner manual Specifications

Page 50

50 Specifications

Video Heads

Four heads – Hi-Fi (VRB612)

Four heads (VRB412)

Video Signal

EIA standards; NTSC color

Antenna

VHF/UHF – 75 ohm external antenna terminal

VHF Output Signal

Channel 03 or 04 (switchable) 75 ohms unbalanced

Power Requirement

120V AC; 60Hz

Power Consumption

14W (VRB612)

12W (VRB412)

Operating Temperature

41°F (5°C) to 104°F (40°C)

Relative Humidity

10% to 80%

Weight

5.5lbs. (2.5 kg.) (VRB612)

5.3Ibs. (2.4 kg.) (VRB412)

Dimensions

14-3/16” (W) x 3-5/8” (H) x 8-3/4” (D) (360mm x 92mm x 223mm)

Tuner Broadcast Channels

VHF 2-13, UHF 14-69

Cable TV Channels

1-125

NOTE: Designs and specifications are subject to change without notice.

Image 50
Contents VRB412AT VRB612AT Dear Philips product owner For Customer UseIntroduction FeaturesSafety Precautions Declaration of ConformityTable of Contents Before Using Your VCR Hookups without a Cable Box/Direct Broadcast System Disconnect the antenna or cable from your TVHookups without a Cable Box/Direct Broadcast System cont’d Plug in the TV and the VCRRecording/Viewing Any Channel Hookups with a Cable Box/Direct Broadcast SystemConnections Hookups with a Cable Box/Direct Broadcast System cont’d Recording One Channel/Watching AnotherVRB412 Hookups with a Stereo TVVRB612 Press the VCR button, then press the Power button Turning on Your VCRVRB612 only Automatic Channel SetupPress the VCR button Press the Menu button Adding/Deleting Channels Press the STATUS/EXIT buttonReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitDo each step within 60 seconds of the previous step Setting the ClockManual Clock Setting Setting the Clock cont’d Enter a 0 before a single-digit numberAutomatic Clock Setting Press the VCR button, then press the Menu buttonTime Zone Daylight-Savings Time Press the VCR buttonLanguage Selection Setting the Remote to Operate a TV TV Codes2Find VCR Button VOLume o/p Button Press to adjust the volume of your TVEject Button Menu ButtonRemote Control Buttons cont’d TV ButtonIf you select Status ON, then select Counter only OFF Status Display example onlyIf you select Status ON, then select Counter only on If you select Status OFFVCR Light Timer LightVCR Display Panel Cassette CompartmentFront Panel Rear Panel Playing VHS Quasi Play Back SqpbRecording VCR light does not appear, press the VCR/TV button onceRecording One Channel/Watching Another One-Touch Recording OTR CH12Timer Recording DailyTimer Recording cont’d Time OFF To Correct Push Clear To END Push ExitPress the STATUS/EXIT button. Program WAS COM Tape SpeedsChecking or Cancelling Timer Recordings Rerecording Tape Duplication RF coaxial cablePress the F.FWD/B button so that on appears beside VCR SET UP, then press the F.FWD/B buttonRepeat Play Real-Time Counter Memory Press the STATUS/EXIT button to see the status displayTime Search Press the VCR button Press the Time Search buttonSuper High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still PictureAutomatic Operation Features Multi-Channel Television Sound System VRB612 only Understanding On-Screen DisplaysMulti-Channel Television Sound System VRB612 only cont’d Press the RECord/OTR button to start recordingHi-Fi Stereo Sound System VRB612 only Blue Background Helpful Hints Helpful Hints cont’d Glossary Cable Box/DBS Output Channel 03 orSpecifications Renewed Index AutomaticPage Page Page Supplied Accessories