Setting the Clock cont’d, Helpful Hints | Philips VRX562AT instruction

Philips VRX562AT warranty Setting the Clock cont’d, Automatic Clock Setting, Helpful Hints

16 Setting the Clock (cont’d)

Automatic Clock Setting

Press the VCR button, then press the MENU button to

bring up the main menu display.

TO SELECT PUSH NO. SHOWN

1PROGRAM

2VCR SET UP

3TUNER SET UP

4SET CLOCK

5CABLE BOX CONTROLLER

6REMOTE LOCATOR

TO END PUSH EXIT

Press the Number 4 button to select SET CLOCK.

SET CLOCK	[ON]
1 AUTO CLOCK	[ON]
2 SET MANUAL CLOCK	[ON]
3 DAYLIGHT SVG TIME	[ON]
4 SET TIME ZONE
(AUTO)
CABLE BOX USERS

SET CLOCK MANUALLY

TO SELECT PUSH NO. SHOWN

TO END PUSH EXIT

If OFF appears to the right of AUTO CLOCK, press the Number 1 button once. A new display screen will appear. Go to step 4. Or, if ON appears to the right of AUTO CLOCK, press the Number 1 button twice. A new display screen will appear. Go to step 4.

●If you want the VCR to locate a local PBS station from which to take the time, press the Number 1 button to select SET PBS CH. AUTO. When the current time appears on-screen, you’re finished. Press the STATUS/EXIT button to exit. Or, you may be prompted to turn off the VCR. Press the STATUS/EXIT button, then go to step 5.

NOTE: CANNOT FIND PBS CLOCK DATA may flash on-screen. In this case, tell the VCR the PBS station from which to take the time.

●If you want to tell the VCR the PBS station from which to take the time, press the Number 2 button to select SET PBS CH. MANUAL, then use the Number buttons to enter the channel number of the desired PBS station. When the current time appears on-screen, you’re finished. Press the STATUS/EXIT button to exit.

NOTE: CANNOT FIND PBS CLOCK DATA may flash on-screen. In this case, press the Number 1 button to choose SELECT NEW PBS CH., then use the Number buttons to enter the channel number of another PBS station. Or, press the Number 2 button to select SET PBS CH. AUTO. Press the STATUS/EXIT button, then go to step 5.

Turn off the VCR power, and leave it off for several min- utes. When the current time appears on the VCR display panel, the clock is set. You may turn on the VCR again.

5	CBL/DSS		VCR	TV
	PAUSE	POWER		VCR PLUS+
	/STILL			/ENTER
	SLOW			F.ADV
3	STATUS/EXIT			CLEAR
		MENU			1
	1		2	3	1
	V			C
		VOL	CH
	V			C
2	4		5	6	4
2	7		8	9
	100		0	A.CH
	REC/OTR	INDEX	SKIP
	REC/OTR	SEARCH	SEARCH	VCR/TV
	SPEED	MEMORY

Helpful Hints

For Automatic Clock Setting

•If you enter an incorrect PBS chan- nel number at step 4, press the CLEAR button, then enter the cor- rect channel number.

•If you have an antenna, you may select channels 2 - 69 at step 4. If you have a cable connection, you may select channels 1 - 125.

•If you select SET PBS CH. AUTO at step 4, you cannot manually select the PBS channel from which you want the VCR to take the time.

•The clock cannot be set automati- cally if you don’t receive a channel that carries a time signal in your area. Set the clock manually.

•If there are only a few channels in your area that carry time signals, setting the clock automatically may take several minutes. If nothing happens even after you wait several minutes, set the clock manually.

•You cannot select AUTO CLOCK at step 3 during tape playback.

•The clock cannot be set automati- cally if CABLE BOX CONTROLLER is set to ON. (See pages 38 - 39.) You must set the clock manually. If you set AUTO CLOCK to ON at step 3 when CABLE BOX CON- TROLLER is ON, CABLE BOX USERS SET CLOCK MANUALLY flashes on-screen for about five sec- onds, then the manual clock setting menu appears. Follow steps 5-7 on page 15.