Yamaha DSP-AX463 owner manual Specifications, 75 En

Page 77

Specifications

AUDIO SECTION

• Minimum RMS Output Power for Front, Center, Surround

1 kHz, 0.9% THD, 6 Ω	105 W
• Dynamic Power
IHF, 6/4/2 Ω	100/110/125 W
• Maximum Input Signal
CD, etc. Effect On, 1 kHz, 0.5% THD	2.0 V or more
• Frequency Response
CD, etc. to Front L/R	10 Hz to 100 kHz, –3 dB
• Total Harmonic Distortion
1 kHz, 50 W, Front L/R, 6 Ω	0.06% or less
• Signal to Noise Ratio (IHF-A Network)
CD (200 mV) to Front L/R, Effect Off	98 dB or more
CD (250 mV) to Front L/R, Effect Off	100 dB or more
• Residual Noise (IHF-A Network)
Front L/R	150 µV or less
• Channel Separation (1 kHz/10 kHz)
CD, etc. (5.1 kΩ shorted) to Front L/R
...................................................................	60 dB/45 dB or more
• Tone Control (Front L/R)
BASS Boost/Cut	±10 dB/100 Hz
TREBLE Boost/Cut	±10 dB/20 kHz
• Headphone Jack Rated Output/Impedance	400 mV/470 Ω
• Input Sensitivity/Input.................................................................Impedance	200 mV/47 kΩ
CD, etc.	200 mV/47 kΩ
MULTI CH INPUT	200 mV/47 kΩ
• Output Level/Output Impedance	200 mV/1.2 kΩ
AUDIO OUT (REC)	200 mV/1.2 kΩ
SUBWOOFER OUTPUT	4 V/1.2 kΩ

•Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz) H.P.F.

(FRONT SP, CENTER SP, SUR. L/R SP:

SMALL/SML)	12 dB/oct.
L.P.F. (Subwoofer)	24 dB/oct.

VIDEO SECTION

• Video Signal Type (Gray back)		PAL
• Signal Level		1 Vp-p/75 Ω
Composite
Component	1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (PB/PR)
• Signal to Noise Ratio		50 dB or more
• Maximum Input Level		1.5 Vp-p or more
• Frequency Response (MONITOR OUT)
Component Signal		5 Hz to 60 MHz, –3 dB

GENERAL

• Power Supply	230 V AC, 50 Hz
• Power Consumption	240 W
• Standby Power Consumption	0.8 W
• Dimensions (W x H x D)	435 x 151 x 352 mm
	(17-1/8” x 5-15/16” x 13-7/8”)
• Weight	8.5 kg (18 lbs 12 oz)

* Specifications are subject to change without notice.

INFORMATION

ADDITIONAL

English

75 En

Image 77

Contents DSP-AX463 Special Instructions for U.K. Model For U.K. customersContents Features Getting started Quick start guide Set up your speakersPreparation Check the items Press Scene 1 button Enjoy DVD playbackSurround speakers Front and center speakersFor further connections About Scene function Default assigned Scene templatesPress Scene 1 button What do you want to do with this unit? Name ConnectionsRear panel 10 En Placing speakers11 En Connecting speakersFront B terminals Surround speakers Right LeftConnecting to the Speaker terminals Before connecting to the Speakers Terminal12 En 10 mm 3/813 En Information on jacks and cable plugsAudio jacks Video jacks14 En Audio and video signal flowInformation on Hdmi 15 En Connecting video componentsConnecting a DVD player Connecting other components16 En DVD playerConnecting a set-top box Connecting a DVD recorder, PVR or VCR17 En PVR or VCRConnecting a CD player, a CD recorder Connecting audio componentsConnecting a multi-format player or an external decoder 18 EnGame console or Video camera Using the Video AUX jacks on the front panel19 En Set this unit to the standby mode Connecting the power cable Turning on and off the power20 En Turning on this unit21 En Front panel display22 En Using the remote controlUsing Auto Setup Optimizing the speaker setting for your listening room23 En Make sure of the following check points24 En Number of speakers SP 25 EnSpeaker distance Dist Speaker level LVLPress 7n and then press 7l / h to select SET or Cancel If an error screen appears26 En If Warning appearsSelecting the desired Scene template Selecting the Scene templates27 En Selected Scene template is assigned to the buttonWhich Scene template would you like to select? 28 En29 En Preset Scene templates descriptionsCreating your original Scene templates Customizing the preset Scene Templates30 En Renaming the Scene templates31 En Using remote control on the Scene featureControlling the input source Components in the Scene mode Playback Quick guide to contentsBasic operations 32 En33 En Selecting audio input jacksSelecting the Multi CH Input component Muting the audio output Using your headphones34 En Current status screen appears in the OSD35 En Displaying the input source informationAudio information Video information36 En Using the sleep timer37 En Sound field programsSound field program descriptions 38 En Enjoying 2-channel sources using Standard decodersEnjoying unprocessed input sources Straight decoding mode Editing sound fields parameters 39 EnAdjusting the tonal quality Using audio featuresAdjusting the speaker level Enjoying high quality sound41 En Selecting the night listening mode42 En Playback operationSupported USB devices Press J Input l / h repeatedly or press 3USB to select USBFunction of the play information display 43 EnPress 7ENTER to play the selected file Playback icon All all repeat, 1 single repeat iconsRemote control operation Using iPodControlling iPod in the simple remote Mode Controlling iPod45 En Controlling iPod in the menu browse ModePress 3V-AUX/DOCKand then Shuffle ShufflePairing by using SET Menu Using Bluetooth componentsQuick pairing 46 En47 En Recording48 En Auto setup Auto SetupManual setup Manual Setup 49 En Using SET MenuSignal information 50 En Speaker settings Aspeaker SET51 En Speaker level BSP Level 52 EnSpeaker distance CSP Distance Unit Unit53 En Audio settings Gaudio SETCenter speaker equalizer Dcenter GEQ Low-frequency effect level Elfe LevelInitial volume INIT.VOL Maximum volume MAX VOL54 En Support audio Support AudioInput assignment 55 EnFor Coaxial Input jack For Optical Input jacks 2Decoder select mode Multi channel input setupDTS decoder prioritize setting 56 En57 En Display settings Adisplay SETPress 7ENTER to start pairing Bluetooth setting Ebluetooth SETPress 8RETURN to exit from Start Pairing 58 EnUSB playback styles Fusb Play Style 59 EnControlling this unit, a TV, or other components Remote control features60 En Controlling this unitControlling other components 61 EnRemote control code default settings Setting remote control codesInput Component Manufacturer Default 62 En63 En Advanced setupInitializing Init Only a STANDBY/ON, G Program l / hProblem Cause Remedy See Troubleshooting64 En General65 En 66 En 67 En Before Auto SetupDuring Auto Setup 1OUT of Phase After Auto Setup3LEVEL Error 68 En69 En Access errorDisconnected Unable to playIPod 70 En71 En BluetoothResetting the system Remote controlAdvanced setup menu appears in the front panel display 72 En73 En GlossaryLFE 0.1 channel 74 EnMP3 PCM Linear PCM75 En SpecificationsNumerics Index76 En Low-frequency effect level 77 EnUnplug HP 78 EnConditions 79 EnAB C D Front panelPower USB Mute MD/CD-R Tuner DVD DTV/CBL DVR Iii List of remote control codesTape Deck LD playerITT VCR WN25770 Front panel DSP-AX463TV AV Remote control