Philips VRA451 owner manual Hi-Fi Stereo Tape Playback VRA651 only

Hi-Fi Stereo Tape Playback (VRA651 only) 45

If a tape is recorded in Hi-Fi stereo, follow the steps below to play the tape in Hi-Fi stereo.

1

Press the VCR button, then press the MENU button.

SELECT , 9 CHOOSE >/OK

→VCR SET UP TUNER SET UP INITIAL SET UP

TO END PUSH EXIT

2

Press the PLAY 8 or STOP 9 button to select VCR SET UP, then press the FF :/OK button.

SELECT , 9	CHOOSE >/OK
→ ON SCREEN MODE		ON
BLUE BACKGROUND		ON
TIMER REC SPEED		MANUAL
VIDEO STABILIZER		OFF
AUDIO OUT		HIFI
STEREO/SAP		STEREO

TO END PUSH EXIT

3

Press the PLAY 8 or STOP 9 button to select AUDIO OUT, then press the FF :/OK button so that HIFI appears beside AUDIO OUT.

4

Press the EXIT/STATUS button.

5

Press the PLAY 8 button to start tape playback.

					1
CBL / DBS		TV			VCR
VCR/TV		POWER			EJECT
QUICK PROGRAMMING
1	+	2	+		3
START	.............	STOP	.............		DATE
4	-	5	-		6
DBS		DAILY			WEEKLY
7		8			9
SPEED		0			CLEAR
	STILL/SLOW
....		.....		... +
- ....						2,3
REW					/OK
					FF
		PLAY				5
		STOP
VOL		MENU			CH
	EXIT/STATUS
		TIMER

SKIP SEARCH	INDEX	AUDIO/MUTE	4
SMARTPICTURE		REC /OTR

Helpful Hints

•During playback, Hi-Fi stereo may temporarily revert to normal audio when you adjust tracking. This is normal.

•If Hi-Fi stereo continually reverts to normal audio during playback, you may want to press the FF :/OK button to select MONO at step 3.

•Only tapes recorded in Hi-Fi stereo will play in Hi-Fi stereo. Tapes recorded in normal audio will play in normal audio.

•You may also select HIFI or MONO by pressing the VCR button, then repeatedly pressing the AUDIO/MUTE button on the remote control.