Select TV System, Start Auto Programming | Philips VR420/55 instruction

VCR SET UP TUNER SET UP INITIAL SET UP

SELECT: END: MENU

CONFIRM: OK

CONNECT ANTENNA OR CABLE TO VCR FOR AUTO CH. SET

READY: OK

END: MENU

SYS COUNTRY

B/G W.EUR. ASEAN AUST.

D/K CHINA RUS. E.EUR.

I HK S.AF. UK

CLOCK

LANGUAGE ENGLISH

4Press MENU.

The message on the right will appear.

❍3 Select TV System

1 Press OK/STATUS. The TV system selecting menu appears on the TV.

2Press PLAY5 or STOP ∞

to select the appropriate TV system of your residential area.

B/G: For West Europe, ASEAN countries, Australia, New Zealand.

D/K: For China, Russia, East Europe. I: For Hong Kong, South Africa,

United Kingdom.

❍4 Start Auto Programming

4Press PLAY5 or STOP ∞

to select “SET CLOCK” or “LANGUAGE”, depending on which setting you want

to change.SELECT: CHANGE: END: MENU

5To change clock/date:

Repeat step❍2 (Setting the Clock/Date) of “Initial Set Up” on page 5.

To change language:

Press FF 3 repeatedly to choose your preferred

language English or .

6Press MENU to exit.

To Reset the Channels

If you want to re-do the auto programming, follow the procedure below;

1 Press VCR.

2 Press MENU.

3 Press PLAY5 or STOP ∞
to select “TUNER SET UP”
	SELECT: CONFIRM: OK
	END: MENU
then press OK/STATUS.

Press OK/STATUS. Auto prog- ramming starts and the message on the right appears on the TV.

When the auto programming is completed

The message on the right appears

AUTO CH. SET PROCEEDING

PLEASE WAIT

STARTFINISH

4	Press PLAY5 or STOP ∞	CHANGING TUNER SET UP
	to select “AUTO TUNER SET	AUTO TUNER SET UP
	to select “AUTO TUNER SET
	UP” then press OK/STATUS.
5	Press PLAY5 or STOP ∞
5	Press PLAY5 or STOP ∞	SELECT: CONFIRM: OK
	to select the appropriate TV	END: MENU
	to select the appropriate TV

system [(BG, DK, I)] of your residential area.

6 Press OK/STATUS. Auto programming starts.

on the TV, and the lowest channel AUTO CH.SET COMPLETED will be tuned in.

Press CH 5 or ∞ to change channels on the VCR.

You have now completed the initial setting.

If you stop the initial setup procedure while it is proceeding:

The VCR enters the initial setup mode again the next time you turn on the VCR.

Initial setup will not start in the following cases:

•If there is a tape inserted.

•If any of the initial setup procedures is finished manually.

ToResettheTimeorLanguage

You can always change the time and language setting after you completed the initial set up.

1Press VCR.

2	Press MENU.	VCR SET UP
3	Press PLAY5 or STOP ∞	TUNER SET UP
3	Press PLAY5 or STOP ∞	INITIAL SET UP

to select “INITIAL SET UP”

then press OK/STATUS.	SELECT: CONFIRM: OK
	END: MENU

When it ends, programmed channels, frequencies

and TV systems are shown on the display.

7 Press MENU to exit.

To Delete or Edit Receivable Channels

1Press VCR.

2Press MENU.

3Press PLAY 5 or STOP ∞ to select “TUNER SET UP”, then press OK/STATUS.

4Press PLAY 5 or STOP ∞ to select “CHANGING TUNER SET UP”, then press OK/

STATUS. The programmed	CH FRQ SYS				CH	FRQ SYS
channel information list		01	150	BG	07	229	BG
channel information list		02	165	BG	08	237	BG
appears.	03		195	BG	09	355	BG
appears.	05		213	BG	11	374	BG
	04		205	BG	10	365	BG
5 Press PLAY 5 or STOP ∞	06		221	BG	12	384	BG
5 Press PLAY 5 or STOP ∞	SELECT:				DELETE: CLEAR
until the desired channel	CHANGE CH: OK
	END: MENU

setting flashes.

5.1: TO DELETE UNWANTED CHANNELS: Press CLEAR. Repeat this step until you delete all unwanted channels.