Philips VR870CC/L/P/07 specifications Important notes for operation, Navigation in the screen menu

Important notes for operation

Switching on	You can switch on the video recorder with the STANDBY/ON	button, the number buttons
	0-9or by putting in a cassette.
Automatic switch-off	If the video recorder is not used for several minutes, it switches itself off automatically. This
	function can be deactivated (e.g. if you want to use the video recorder as a TV receiver). For more
	information, please read the section 'Automatic switch-off' in chapter 'Additional functions'.
	If you have switched the video recorder off with STANDBY/ON	, the time will show in the
	display, e.g. '18:00'.
Time in the display	If the clock has not been set, '--:--' will appear.
	When the video recorder is switched off and the time isn't shown in the video recorder display,
	the clock display may be switched off. You will find more information in the chapter 'Additional
	functions' section 'Switch off the clock display'.
Energy consumption	The video recorder should always be connected to the mains so as not to affect the use of the TV
	or programmed recordings.
	Your video recorder uses less than 4W (with clock display switched off).
Power outage/no	Channel information remains saved for up to 1 year, the time and timer information is saved for up
power	to 3 hours.

	The video recorder and the remote control have the option of an 'Emergency exit'. You can use
Emergency exit	the STANDBY/ON button to interrupt any function or step during use.
	You can operate your device without worry. There is no risk whatsoever of damaging the video
	recorder by performing user steps incorrectly.

Navigation in the screen menu

You can check/change many functions and settings of your video recorder via the screen menu.

The individual functions are selected as follows:

MENU

CLOCK

AUTO INSTALL

MANUAL SEARCH

FOLLOW TV

TV CHANNEL ALLOC.

RECORD SPEED

AUTO STANDBY

VIDEOSYSTEM

SPECIAL SETTINGS

________________________________

…EXITpMENUOK †HOTLINEpCL

Call up the menu: with		MENU .
To select: with P	or	P { .
To enter or change your selection: with the number buttons 0-9 or with			or	.
To save or confirm: with		OK .
To cancel: with STANDBY/ON .
To end: with MENU .

22 Important notes for operation