MENU
CLOCK
AUTO INSTALL
MANUAL SEARCH
FOLLOW TV
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
VIDEOSYSTEM
SPECIAL SETTINGS
________________________________
…EXITpMENUOK †HOTLINEpCL
Switching the remote control command
If you use a second video recorder that reacts to the same remote control command (stop, play, record, etc.) as this video recorder, then you can change the remote control and this video recorder.
1Switch on the TV set. If required, select the programme number for the video recorder.
2Press MENU on the remote control. The main menu will appear.
3Press the SELECT button on the remote control. In addition, press the number button 2 to change the remote control to 'VCR2'.
4Confirm with OK .
The main menu will disappear. If you have switched the remote control and the video recorder to 'VCR2', 'RESPONDS TO VCR2' will appear on the TV screen.
What do I need to pay attention to when changing the remote control and video recorder?
You must always change both video recorder and remote control to the same setting, e.g. video recorder and remote control to 'VCR1' or 'VCR2'.
After you change the batteries in the remote control, it will switch back to 'VCR1'.
How can I change back to 'VCR1'?
-Press MENU . The main menu will appear.
-Press the SELECT button on the remote control. Then press the number button 1 to change the remote control to 'VCR1'.
-Confirm with OK on the remote control. The main menu will disappear. This picture will appear on the screen: 'RESPONDS TO VCR1'
The main menu will not disappear and no message appears
The remote control command was not recognised by the video recorder.
Repeat step 3 .
This will, for example, appear in the display: 'VCR2'
Remote control and video recorder were not both changed. If you press a button for a long time, the video recorder settings appear in the display. In this case 'VCR2'. You need to also change the remote to 'VCR2' (button
SELECT and 2 ).
46 | Other functions |
|