5. Programming a recording (TIMER)
General information
Use a TIMER programming to automatically start and stop a recording at a later time or date. The video recorder will switch to the right programme number and begin recording at the correct time. With this video recorder, you can
*the date you want to make the recording
*the programme number of the TV channel
*the start and stop time of the recording This information is saved in a 'TIMER' block.
Programming a recording
1.Switch on the TV. If required, select the pro- gramme number for the video recorder.
2.Press MENU . The main menu will appear.
3.Select 'TIMER' with PLAY
Then press 
.
4.Select 'ONCE', 'DAILY' or 'WEEKLY' record- ing with PLAY
FWD 1- B .
SELECT K L CHOOSE B
→ONCE
DAILY WEEKLY TIMER LIST
END=EXIT
SelectingONCE/DAILY/WEEKLY recordings
'ONCE': Recording once
'DAILY': Repeated daily recordings from Monday to Friday
'WEEKLY': Repeated weekly recordings (every week on the same day)
Error message : 'FULL'
•If this error message appears after you select 'ONCE', 'DAILY' or 'WEEKLY' on TIMER menu and press FWD 1- B , then all TIMER blocks are already programmed. No more recordings can be programmed. If you want to clear or check a programmed recording(TIMER block), select the programme number on TIMER LIST menu and press CLEAR .
5.Select TIMER block with 0..9 .
6.Enter the Start time (START), End time (STOP), Programme number (PROG) and the Date (DATE) with 0..9
Programme numbers of the 'AV1' and 'AV2' scart socket
You can also programme recordings from exter- nal sources via scart socket AV1(TV)or AV2 (DECODER). Select programme number, 'AV1' with 0.0.1 or 'AV2' with 0.0.2.
7.When all inputs are correct, press STATUS/EXIT . The programming information
is stored in a TIMER block.
8.Insert a cassette with an intact security tab (unprotected).
9.Switch off with STANDBY/ON y .
The programmed recording will only function when the video recorder is switched off with
STANDBY/ON y .
Programming a recording with
'TURBO TIMER'
With Turbo Timer, programming a recording that takes place within the next 24 hours is quick and easy. You don’t even need to switch your TV 'on' as the necessary information will appear in the VCR display. (the figures below are only shown
as examples) |
|
| ||
1.Press |
| . |
| PWR. |
TURBO TIMER |
|
| ||
'StA' will briefly appear |
|
| ||
|
| |||
in the video recorder |
|
| ||
display. After 2 seconds, | PWR. | |||
start time will appear |
|
| ||
|
| |||
(default setting is cur- |
|
| ||
rent time). Set the time |
| PWR. | ||
you want to start recording using
PLAY 
STOP
Error message : 'FUL'
• If this error message appears after pressing 
, then all TIMER blocks are
already programmed. No more recordings can be programmed. If you want to clear or check a programmed recording (TIMER block), select the programme number on TIMER LIST menu and then press 
2.Press TURBO TIMER .
'End' will briefly appear
in the video recorder display. After 2 seconds,
the end time will appear (default setting is same as the start time). Set
the time you want to fin- PWR. ish recording using 
PLAY 
STOP
11 | EN |
|