Philips VR550/58 Setting the language, Setting the clock, Setting the RF out channel

Setting the language

You can change the language for the TV screen menu. However, the video recorder display will only display English text regardless of this set- ting.

1.Switch on the TV. If required, select the pro- gramme number for the video recorder.

2.Press MENU . The main menu will appear.

3.Select 'INITIAL SET UP' with PLAY B-Kor STOP C-Land confirm with FWD 1- B .

4.Select 'LANGUAGE' with PLAY B-Kor STOP C-Land confirm with FWD 1- B .

END=EXIT

5.Select the desired language with PLAY B-Kor

STOP C-L .

6.To end, press STATUS/EXIT .

Setting the clock

If the display shows an incorrect time or '--:--', the time and date must be reset manually. 1.Switch on the TV. If required, select the pro-

gramme number for the video recorder.

2.Press MENU . The main menu will appear.

3.Select 'INITIAL SET UP' with PLAY B-Kor STOP C-Land confirm with FWD 1- B .

4.Select 'CLOCK' with PLAY B-Kor STOP C-Land confirm with FWD 1- B .

TIME --:--

DATE --/--/--

END=EXIT

5.Check the time in 'TIME'. If required,

please change the time with 0..9 .

6.Check 'DAY', 'MONTH' and 'YEAR' in the same way.

7.To end, press STATUS/EXIT .

Setting the RF out channel

In some reception locations it is possible that a TV channel will be sent on the same or similar frequency as the video recorder.

Result: As soon as the video recorder is switched on, the reception quality for this or sev- eral other TV channels will decrease.

The following steps will show you how to change the pre-set 'transmission' (RF out channel) fre- quency on the video recorder.

What is RF out channel?

This electronic component in the video recorder allows the device to transmit audio and video signals via the aerial cable. These signals can be received on a TV just like TV channels.

What is RF out channel frequency?

This frequency or channel indicates the channel on which the audio or video signal is transmitted.

1.Switch on the TV. If required, select the pro- gramme number for the video recorder.

2.Press MENU . The main menu will appear.

3.Select 'INITIAL SET UP' with

PLAY B-K

or

and cconfirm with

.

STOP C-L

FWD 1- B

4.Select 'RF OUT' with

or

PLAY B-K

STOP C-L

and confirm with

.

FWD 1- B

SELECT K L CHOOSE B

→RF OUT CH

36

TV SYSTEM

K

END=EXIT

5.Press

.

FWD 1- B

6.Press

,

or

to select a

PLAY B-K

STOP C-L

0..9

free channel between channel 22 and

channled 69 in your area.

Press

FWD 1- B

7.

.

If you cannot get an interference-free picture and sound, connect the video recorder and the TV with a scart cable. Then, switch the built-in modulator off.

Press STOP C-Lrepeatedly until '--' appears next to 'RF OUT CH' on the TV screen. Then confirm with FWD 1- B .

8.Select 'TV SYSTEM' with PLAY B-Kor

STOP C-L

9.Choose 'K' or 'G' with FWD 1- B . 10.To end, press STATUS/EXIT .

7 EN