Philips VR620CAT owner manual Playing, VHS Quasi Play Back Sqpb

Page 26

26 Playing

Read and follow the steps below to play a tape.

1

Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to.

2

Insert a tape in the VCR. The PWR., VCR, and Cassette-Inside lights will appear on the display panel. If the tape’s record tab is missing, playback will start automatically.

3

If playback does not start automatically, press the VCR button, then press the PLAY/o button.

4

Press the STOP/p button to stop playback.

5

Press the REW(ind)/{ button to rewind the tape.

6

Press the EJECT button to remove the tape.

S-VHS Quasi Play Back (SQPB)

This unit has a SQPB function that allows you to view a tape recorded in S-VHS format. A tape recorded in S-VHS format will play the same as a tape recorded in normal format. This unit auto- matically detects whether the tape is recorded in S-VHS format or in normal format.

When you play a tape recorded in S-VHS format on this unit, you can not get the high resolution that would be available on an S- VHS VCR. Noise lines (black and white streaks) may appear on the picture.

1Turn on the TV.

2Insert a tape in the VCR.

6

EJECT

POWER

 

 

 

MENU

STATUS/EXIT

CLEAR

 

 

1

2

 

3

 

 

4

5

 

6

 

3

7

8

 

9

 

MEMORY

 

 

ALT.CH

 

 

0

 

 

 

REC

 

 

PAUSE

5

/OTR

PLAY

 

/STILL

 

 

 

 

 

REW

 

F.FWD

 

 

STOP

 

 

4

 

CH.

MUTE

 

VOL.

 

VCR

TV

 

CBL/DBS

 

 

VCR/TV

SPEED

TIME SEARCH

 

 

 

ENTER

 

SLOW

 

Helpful Hints

If the tape you want to play is already in the VCR, make sure the VCR power is on and the VCR is in VCR position.

(The VCR light will appear on the dis- play panel. If it does not, press the VCR/TV button once.) Press the VCR button, then press the PLAY/o button.

Other playback options and features are on pages 35-42.

If REPEAT PLAY is ON, playback will begin automatically when you insert a tape, even when the record tab is intact. Details are on page 35.

Tape playback will not begin auto- matically if a timer recording is set and the VCR power is off. Details are on page 39.

Image 26
Contents VR620CAT Dear Philips product owner For Customer UseIntroduction FeaturesSafety Precautions Declaration of ConformityTable of Contents Using the Remote Control Putting Batteries in the Remote ControlBattery Safety VCR maintenanceHookups Without a Cable Box/Direct Broadcast System Disconnect the antenna or cable from your TVHookups Without a Cable Box/Direct Broadcast System cont’d Recording/Viewing Any Channel Hookups With a Cable Box/Direct Broadcast SystemConnections Hookups With a Cable Box/Direct Broadcast System cont’d Recording One Channel/Watching AnotherHookups with a Stereo TV Turning on Your VCR Press the Menu button. The display shown below will appearAutomatic Channel Setup Press the VCR button, then press the Menu buttonAutomatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitSetting the Clock Enter a 0 before a single-digit numberDaylight-Savings Time Press the VCR button, then press the Menu buttonLanguage Selection Setting the Remote to Operate a TV 2TV code Find yourCable BOX Codes 2code Find yourRemote Control Buttons CHannel o/p Buttons TV ButtonIf you select Status ON, then select Counter only OFF On-Screen Status DisplaysIf you select Status ON, then select Counter only on If you select Status OFFRECord Light VCR Display PanelCassette Compartment VCR LightFront Panel Rear Panel Playing VHS Quasi Play Back SqpbRecording Insert a tape with its record tab intact in the VCRRecording One Channel/Watching Another One-Touch Recording Timer Recording DailyTimer Recording cont’d Timer Recording cont’d Tape SpeedsChecking or Cancelling Timer Recordings Rerecording Tape Duplication Press the F.FWD/B button so that on appears beside Repeat PlayPress the PLAY/o button or the STOP/p button to select While the status display is on the screen, press Clear button to reset the real-time counter to zeroReal-Time Counter Memory Time Search Press the VCR button, then press the Time Search but- tonSuper High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still PictureAutomatic Operation Features Multi-Channel Television Sound System Understanding On-Screen DisplaysMulti-Channel Television Sound System cont’d Hi-Fi Stereo Sound System Please see additional notes onBlue Background Helpful Hints Helpful Hints cont’d Limited Warranty Video Cassette Recorder or PlayerPayment Amount $29.95 + Sales Tax = Total Limited Warranty cont’dTo obtain a replacement product from Philips Payment, if applicableGlossary Glossary / SpecificationsSpecifications Index AutomaticPage Page Supplied Accessories