Philips VR620/07 Before you call an engineer, Hotline telephone numbers, With STANDBY/ON

Page 61

Before you call an engineer

If, contrary to expectation, you have any problems using this video recorder, it may be caused by the following reasons.

You will find the phone number in the enclosed guarantee leaflet.

The telephone numbers can be found on the back of this instruction manual. Have the model number (MODEL NO) and the production number (PROD.NO.) of your video recorder ready.

ENGLISH

HOTLINE telephone numbers

The telephone numbers for after-sales service (HOTLINE) are also saved in your video recorder.

To call them up, proceed as follows:

1Switch on the TV set. If required, select the programme number for the video recorder.

2Press MENU . The main menu appears.

3Press CLEAR (CL) . The after-sales service telephone numbers will appear on the screen.

4Using OK , you can select more telephone numbers.

5 To end, press MENU .

 

PROBLEM

SOLUTION

 

 

 

 

 

There is no power supply: check the power supply.

 

 

Your video recorder

A programmed recording is currently being made: if desired, cancel the programmed recording

 

 

does not respond to

with STANDBY/ON .

 

 

Child lock active: switch the child lock off.

 

 

any button being

 

 

There is a technical problem: disconnect from the mains power supply for 30 seconds, then

 

 

pressed:

connect again.

 

 

 

If this doesn't help, you could reset your video recorder to the default factory settings.

 

 

 

 

 

 

 

Attention:

 

Resetting devices to

All the information stored (TV channels, time and date, TIMER) will be cleared.

 

1. Disconnect from the mains power supply.

 

default factory settings

2. Press and hold the STANDBY/ON /I button on the device and reconnect to the mains

 

 

power supply.

 

 

3. Release the button when 'OSD' appears in the video recorder display.

 

 

 

 

 

Cassette is jammed in

Don't use force. Pull out the mains plug for a moment.

 

 

the video recorder:

 

 

 

 

 

 

Remote control not pointed toward the video recorder: point it at the video recorder.

 

Remote control does

There is a technical problem: Take out the batteries, wait for 10 seconds and place them back.

 

not work:

Batteries have run out: change the batteries.

 

You have given the wrong remote control command: read 'Switching remote control command' in

 

 

 

 

chapter 'Additional functions'.

 

 

 

 

Before you call an engineer

57

 

Page 60 Page 62
Image 61
Page 60 Page 62
Contents Table of contents Remote control Front of the device Additional TV functionsBehind the flap at the left-hand corner on the front Symbols on your video recorder display Page Phil IntroductionDear Philips customer Supplied accessories SpecificationsVoltage 220-240V/50Hz Energy consumption 16WImportant notes regarding operation Special functions of your new video recorder Important information for customers in Great Britain Preparing the remote control for operation Connecting the video recorderConnecting your video recorder to the TV set Connecting with a scart cableAV at Connecting with a scart cableBack of the video recorder and the other Scart socket on your TV set reserved for VideoMy screen is empty Connecting without a scart cableYou can find more details in chapter Initial Installation Connecting additional devicesSocket EXT.2 AV Do not see a test screenInitial installation Installing your video recordingSeeks out and stores all available TV channels Decoder allocation How can I switch off the decoder?Or P To select the line ManualManual TV channel search Using Select the desiredConfirm with Number that you Want to use for the TV channel, e.g. P01What is NICAM? Using the satellite receiverDont know the channels for my TV stations With a scart cable Cannot switch my TV set to programme numberDeleting sorting Automatic TV channel search AutoinstallSorting and clearing TV channels manually Monitor functionMain menu will appear on the screen Deleting TV channelsTime/date is displayed incorrectly despite manual setting Setting the time and dateCheck MONTH, Date and Time in the same way Navigation in the screen menu Important notes for operationCall up the menu with General information Tape ListAdding a cassette to the Tape List On the screen after Checking Cassette I see the messageEditing recording titles Clear CL at a symbolSearching for a title in the Tape List Want to cancel the searchSelect the title that you want to play back with P What do the displays on the screen mean?Press Clear CL Cassette contents are not deletedPlayback To stop the playback, press Stop on the remote control orPlaying cassettes On the video recorderPlaying back Ntsc cassettes Automatic switch-off of special functionsDisplaying current tape position How can I set the counter to 00000?Still picture / slow motion Searching for a tape position with picture scanningAutomatic search for a tape position index search Instant ViewStop the tape with Stop Press Reverse orAutomatic search for a blank space on the tape It automatically switches to pauseAppear in the display Cassette is ejectedOptimising tracking Eliminating picture interferenceOptimising still picture Cannot reach optimal quality for the still pictureAutomatic switch-off Recording without automatic switch-offManual recording EXT.1 AV , EXT.2 AVPreventing accidental erasing of cassettes Selecting the recording speed SP or LP Lining up recordings assemble cutConfirm with OK To end, press Menu With OK Switching off Record LinkSelect function on with Confirm with OK To end, press Menu Insert a cassetteDirect Record Search symbol appears in the display a moving symbolHow does Direct Record work? Notv appears in the displaySwitching Direct Record on or off What is VPS/PDC? Programming a recording TimerWhat do I need to know about VPS/PDC? Plus+ Programming a recording with VideoSelecting onetime/daily/weekly recordings Recorder is switched off with STANDBY/ON Select switchSwitch off the video recorder with Problems and solutions for programmed recordingsEnd of the tape was reached during recording CassetteProgramming a recording without Video Plus+ Stop Problem Problem solving for programmed recordingsProgramming a recording with Press Turbo TimerRecordings Problems and solutions for programmedCassette Delete programmed recording Buttons Confirm with OK Switch off with STANDBY/ONOther functions How can I change back to Automatic Switch-over?Changing the video colour system Video colour systemsChild lock Switching the on-screen display OSD off or onWill flash in the video recorder display Which settings can I choose? Switch off the clock displayHow can I switch on the clock display? How can I change back to VCR1? SelectMain menu will not disappear and no message appears This will, for example, appear in the display VCR2Continuous playback Select line Special Settings usingOr Play Start the continuous playback with the Play Playback buttonAutomatic switch-off What goes on behind the settings? Press Select . This will show the current sound settingAutomatic switch to Mono Selecting the sound channelOptimising the modulator Suppressing interferenceAddition STOP/EJECTHow can I switch the modulator back on? Switching the modulator on / offOr in the display MOD Modulator offHotline telephone numbers Before you call an engineerWith STANDBY/ON Before you call an engineer English 1142/010 VR620/07Addendum Sheet VR620/07

VR620/07 specifications

The Philips VR620/07 is a state-of-the-art vacuum cleaner designed to meet the demands of modern households. Its sleek and compact design makes it a perfect fit for both small apartments and larger homes. With a focus on powerful suction and ease of use, this model stands out in its category.

One of the main features of the Philips VR620/07 is its advanced cyclonic technology. This innovative system ensures that dirt and dust are separated from the air, maintaining a strong suction power without the need for a bag. The result is efficient cleaning performance and reduced maintenance, as users do not have to worry about replacing bags frequently.

Equipped with a powerful motor, the VR620/07 delivers exceptional suction capability across various surfaces, including carpets, hardwood floors, and tiles. This versatility ensures that users can clean every corner of their home without switching devices. The vacuum also features multiple settings that allow users to optimize its performance for different types of flooring, enhancing its usability.

The Philips VR620/07 is designed with user convenience in mind. It comes with an easy-to-empty dust container that holds a substantial amount of dirt, minimizing the need for frequent emptying during cleaning sessions. Additionally, its ergonomic handle ensures comfortable maneuverability, reducing strain on the user’s wrists during extended use.

Another notable characteristic of the VR620/07 is its noise-reduction technology. While traditional vacuum cleaners can be quite loud, this model operates at a reduced sound level, making it ideal for use in homes with children or pets. Users can clean at any time of the day without disturbing others, adding to its appeal.

Furthermore, the Philips VR620/07 includes a variety of accessories that enhance its cleaning ability. These attachments, such as the crevice tool and brush nozzle, allow users to reach tight spaces and effectively clean upholstery, ensuring comprehensive cleaning throughout the home.

In conclusion, the Philips VR620/07 is an intelligent blend of power, versatility, and user-friendliness. Its advanced technologies and thoughtful design make it an excellent choice for anyone seeking an effective and efficient cleaning solution. Whether tackling everyday messes or deep-cleaning tasks, this vacuum cleaner stands ready to deliver outstanding results while making the cleaning experience as effortless as possible.
Top Page Image Contents