Philips VR620/07 specifications Before you call an engineer

Page 62

PROBLEM

No picture when you play a cassette:

Poor picture quality when you play a cassette:

No recording possible:

Programmed recording does not work:

The wrong TV channel was decoded (entered) after you programmed a recording using Video Plus+

There is picture or sound interference on TV reception:

SOLUTION

There is no recording on the cassette: change the cassette.

You have selected the wrong programme number on the TV for playing cassette: on the TV, select the correct programme number for the video recorder.

The cable connecting the TV set and the video recorder has come loose: check the cable.

Your TV set is not properly adjusted.

The cassette is badly worn or of poor quality: use new cassette.

Tracking is not properly adjusted: turn to chapter 'Eliminating picture interference' and read the section 'Optimising tracking'.

Please read chapter 'Eliminating picture interference'.

The TV channel you want to record is not stored or you selected the wrong programme number: check TV channels stored.

A cassette was inserted that does not have the security tab (cannot be used to record): Insert a cassette with an intact security tab or change cassette. For more information, please see the section 'Preventing accidental erasing of cassettes' in chapter 'Manual Recording'.

'VPS/PDC' switched on but 'VPS/PDCtime' wrong: 'enter 'VPS/PDCtime exactly to the minute. Have your aerial checked.

You have programmed the wrong time or date: check time and date.

Check time and date. If time and date are wrong despite manual setting, you can switch 'SMART CLOCK' off. Please read the section 'Setting the time and date' in the chapter 'Installing your video recorder'.

You have not set the TIMER properly: Check the programmed recordings (TIMER block).

You have put in a cassette that cannot be recorded on: undo the erase protection on the cassette.

1.Enter the PlusCode programming number of the desired TV channel.

2.Confirm with OK .

3.Check the programme number/channel name in the 'PROG.' input field

4.If this does not correspond to the desired TV channel, select the input field and change the programme number/channel name.

5. Confirm with TIMER .

Turn to chapter 'Suppressing interference' and read 'Optimising the modulator' and 'Switching on/off the modulator'.

Have your aerial checked.

58

Before you call an engineer

 

Page 61 Page 63
Image 62
Page 61 Page 63
Contents Table of contents Remote control Behind the flap at the left-hand corner on the front Additional TV functionsFront of the device Symbols on your video recorder display Page Dear Philips customer IntroductionPhil Voltage 220-240V/50Hz SpecificationsSupplied accessories Energy consumption 16WImportant notes regarding operation Special functions of your new video recorder Important information for customers in Great Britain Connecting your video recorder to the TV set Connecting the video recorderPreparing the remote control for operation Connecting with a scart cableBack of the video recorder and the other Connecting with a scart cableAV at Scart socket on your TV set reserved for VideoConnecting without a scart cable My screen is emptySocket EXT.2 AV Connecting additional devicesYou can find more details in chapter Initial Installation Do not see a test screenSeeks out and stores all available TV channels Installing your video recordingInitial installation Or P How can I switch off the decoder?Decoder allocation To select the line ManualConfirm with Using Select the desiredManual TV channel search Number that you Want to use for the TV channel, e.g. P01Dont know the channels for my TV stations Using the satellite receiverWhat is NICAM? Cannot switch my TV set to programme number With a scart cableDeleting sorting Autoinstall Automatic TV channel searchMonitor function Sorting and clearing TV channels manuallyDeleting TV channels Main menu will appear on the screenCheck MONTH, Date and Time in the same way Setting the time and dateTime/date is displayed incorrectly despite manual setting Call up the menu with Important notes for operationNavigation in the screen menu Adding a cassette to the Tape List Tape ListGeneral information On the screen after Checking Cassette I see the messageClear CL at a symbol Editing recording titlesSelect the title that you want to play back with P Want to cancel the searchSearching for a title in the Tape List What do the displays on the screen mean?Cassette contents are not deleted Press Clear CLPlaying cassettes To stop the playback, press Stop on the remote control orPlayback On the video recorderDisplaying current tape position Automatic switch-off of special functionsPlaying back Ntsc cassettes How can I set the counter to 00000?Searching for a tape position with picture scanning Still picture / slow motionStop the tape with Stop Instant ViewAutomatic search for a tape position index search Press Reverse orAppear in the display It automatically switches to pauseAutomatic search for a blank space on the tape Cassette is ejectedOptimising still picture Eliminating picture interferenceOptimising tracking Cannot reach optimal quality for the still pictureManual recording Recording without automatic switch-offAutomatic switch-off EXT.1 AV , EXT.2 AVPreventing accidental erasing of cassettes Confirm with OK To end, press Menu Lining up recordings assemble cutSelecting the recording speed SP or LP Select function on with Switching off Record LinkWith OK Confirm with OK To end, press Menu Insert a cassetteHow does Direct Record work? Search symbol appears in the display a moving symbolDirect Record Notv appears in the displaySwitching Direct Record on or off What do I need to know about VPS/PDC? Programming a recording TimerWhat is VPS/PDC? Selecting onetime/daily/weekly recordings Programming a recording with VideoPlus+ Select switch Recorder is switched off with STANDBY/ONEnd of the tape was reached during recording Problems and solutions for programmed recordingsSwitch off the video recorder with CassetteProgramming a recording without Video Plus+ Stop Problem solving for programmed recordings ProblemPress Turbo Timer Programming a recording withCassette Problems and solutions for programmedRecordings Buttons Confirm with OK Switch off with STANDBY/ON Delete programmed recordingChanging the video colour system How can I change back to Automatic Switch-over?Other functions Video colour systemsWill flash in the video recorder display Switching the on-screen display OSD off or onChild lock How can I switch on the clock display? Switch off the clock displayWhich settings can I choose? Main menu will not disappear and no message appears SelectHow can I change back to VCR1? This will, for example, appear in the display VCR2Or Play Select line Special Settings usingContinuous playback Start the continuous playback with the Play Playback buttonAutomatic switch-off Automatic switch to Mono Press Select . This will show the current sound settingWhat goes on behind the settings? Selecting the sound channelAddition Suppressing interferenceOptimising the modulator STOP/EJECTOr in the display MOD Switching the modulator on / offHow can I switch the modulator back on? Modulator offWith STANDBY/ON Before you call an engineerHotline telephone numbers Before you call an engineer English VR620/07 1142/010Addendum Sheet VR620/07

VR620/07 specifications

The Philips VR620/07 is a state-of-the-art vacuum cleaner designed to meet the demands of modern households. Its sleek and compact design makes it a perfect fit for both small apartments and larger homes. With a focus on powerful suction and ease of use, this model stands out in its category.

One of the main features of the Philips VR620/07 is its advanced cyclonic technology. This innovative system ensures that dirt and dust are separated from the air, maintaining a strong suction power without the need for a bag. The result is efficient cleaning performance and reduced maintenance, as users do not have to worry about replacing bags frequently.

Equipped with a powerful motor, the VR620/07 delivers exceptional suction capability across various surfaces, including carpets, hardwood floors, and tiles. This versatility ensures that users can clean every corner of their home without switching devices. The vacuum also features multiple settings that allow users to optimize its performance for different types of flooring, enhancing its usability.

The Philips VR620/07 is designed with user convenience in mind. It comes with an easy-to-empty dust container that holds a substantial amount of dirt, minimizing the need for frequent emptying during cleaning sessions. Additionally, its ergonomic handle ensures comfortable maneuverability, reducing strain on the user’s wrists during extended use.

Another notable characteristic of the VR620/07 is its noise-reduction technology. While traditional vacuum cleaners can be quite loud, this model operates at a reduced sound level, making it ideal for use in homes with children or pets. Users can clean at any time of the day without disturbing others, adding to its appeal.

Furthermore, the Philips VR620/07 includes a variety of accessories that enhance its cleaning ability. These attachments, such as the crevice tool and brush nozzle, allow users to reach tight spaces and effectively clean upholstery, ensuring comprehensive cleaning throughout the home.

In conclusion, the Philips VR620/07 is an intelligent blend of power, versatility, and user-friendliness. Its advanced technologies and thoughtful design make it an excellent choice for anyone seeking an effective and efficient cleaning solution. Whether tackling everyday messes or deep-cleaning tasks, this vacuum cleaner stands ready to deliver outstanding results while making the cleaning experience as effortless as possible.
Top Page Image Contents