Philips VR623CAT Timer Recording cont’d, Time OFF To Correct Push Clear To END Push Exit

Page 34

34 Timer Recording (cont’d)

4

Use the Number buttons (1 - 8) to select a slot in which to store the timer recording. There are eight slots. Numbers for open slots will flash on the screen.

NOTE: If you enter a number for a slot that has already been used to store a timer recording, PREVIOUSLY SET PROGRAM will appear on the screen briefly. Information about the program in that slot will appear on the screen. If this happens, press the STATUS/EXIT button, then select another number.

5

Use the Number buttons to enter the channel you want to record.

●Cable Users, enter channel numbers as a two-digit number for the quickest results. For example, to select channel 6, press

0,6. If you only press the Number 6 button, channel 6 will be selected after a brief delay. There also may be a brief delay when you select channels 10, 11, and 12. If you want to select chan- nels 100 and above, enter channel numbers as a three-digit number. For example, to select channel 117, press 1, 1, 7. Antenna Users, enter channel numbers as a two-digit number for the quickest results. For example, to select channel 5, press 0,5. If you only press the Number 5 button, channel 5 will be selected after a brief delay.

●If you are recording from line input, press 0,0 to select AV REAR.

●If you are using a Cable Box/DBS, select the Cable Box/DBS output channel (03 or 04). Set the Cable Box/DBS to the chan- nel you want to record. Leave the Cable Box/DBS on for the timer recording. See page eight for details.

6

Press two Number buttons for the hour you want the recording to begin. Press two Number buttons for the minute you want the recording to begin. Press 1 for AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.

ONE TIME PROGRAM

PROGRAM

1

CHANNEL

10

TIME ON

– – : – –

TO CORRECT PUSH CLEAR

TO END PUSH EXIT

7

Follow the instructions in step 6 to enter the recording’s stop time. (AM or PM will be set automatically.)

ONE TIME PROGRAM

PROGRAM

1

CHANNEL

10

TIME ON

09:30 PM

TIME OFF

– – : – –

TO CORRECT PUSH CLEAR

TO END PUSH EXIT

4-7

EJECT

POWER

MENU STATUS/EXIT CLEAR

1 2 3

4 5 6

7 8 9

MEMORYALT.CH

 

0

REC

PAUSE

/OTR

/STILL

PLAY

REW

 

F.FWD

 

STOP

 

CH.

 

VOL.

 

MUTE

 

VCR

TV

CBL/DBS

VCR/TV

SPEED

TIME SEARCH

 

ENTER

SLOW

Helpful Hints

•Entries that do not match the VCR’s clock or calendar will cause a ques- tion mark to appear on the screen.

•If you are recording from line input, connect the audio and video cables to the AUDIO IN and VIDEO IN jacks on the back of the VCR. (Please see illustration on page 37.)

Page 33 Page 35
Image 34
Page 33 Page 35
Contents VR423CAT VR623CAT Dear Philips product owner For Customer UseIntroduction FeaturesSafety Precautions Declaration of ConformityTable of Contents Before Using Your VCR Hookups without a Cable Box/Direct Broadcast System Disconnect the antenna or cable from your TVPlug in the power cords of the TV and the VCR Hookups without a Cable Box/Direct Broadcast System cont’dConnections Hookups with a Cable Box/Direct Broadcast SystemRecording/Viewing Any Channel Hookups with a Cable Box/Direct Broadcast System cont’d Recording One Channel/Watching AnotherHookups with a Stereo TV VR623CATPress the VCR button, then press the Power button Turning on Your VCRPress the VCR button Press the Menu button Automatic Channel SetupVR623CAT only Automatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitManual Clock Setting Do each step within 60 seconds of the previous stepSetting the Clock cont’d Automatic Clock Setting Press the VCR button, then press the Menu buttonTime Zone Daylight-Savings Time Language Selection Audio OUT Language Blue Background To END Push ExitSetting the Remote to Operate a TV Cable BOX Codes 2code Find yourMenu Button VOLume o/p ButtonsEject Button Cable UsersRemote Control Buttons cont’d TV ButtonIf you select Status ON, then select Counter only OFF Status Display example onlyIf you select Status ON, then select Counter only on If you select Status OFFVCR Display Panel Remote Sensor REWind Button Power ButtonFWD Fast Forward Button Video In JackVideo OUT Jack Rear PanelAudio OUT Jacks OUT JackPlaying VHS Quasi Play Back SqpbRecording Other recording options are on pages3&7 One-Touch Recording OTR CH12Set the clock. Details are on pages DailyTimer Recording cont’d Time OFF To Correct Push Clear To END Push ExitPress the STATUS/EXIT button. Program WAS COM Tape SpeedsChecking or Cancelling Timer Recordings RF coaxial cable Rerecording Tape DuplicationTurn on the TV and set it to channel 03 or 04, whichever Press the PLAY/o button or the STOP/p button to select Repeat PlayPress the F.FWD/B button so that on appears beside Real-Time Counter Memory Time Search Press the VCR button Press the Time Search buttonViewing a Still Picture Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Slow Motion PictureAutomatic Operation Features Multi-Channel Television Sound System VR623CAT only Understanding On-Screen DisplaysMulti-Channel Television Sound System VR623CAT only cont’d Hi-Fi Stereo Sound System VR623CAT only Please see additional notes onBlue Background Audio OUT Language → Blue Background To END Push ExitGlossary Cable Box/DBS Output Channel 03 orHelpful Hints Helpful Hints cont’d Limited Warranty Video Cassette Recorder or PlayerPayment Amount $29.95 + Sales Tax = Total Limited Warranty cont’dTo obtain a replacement product from Philips Payment, if applicableSpecifications Index AutomaticPage Page Supplied Accessories
Top Page Image Contents