Philips VR423CAT owner manual Multi-Channel Television Sound System VR623CAT only

Page 43

Multi-Channel Television Sound System (VR623CAT only) 43

Your VCR can play recordings broadcast in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound from two sources. Your VCR also can play tapes recorded in a second audio (usually, that means your program is recorded in a second language). Of course, your VCR will play tapes recorded in monaural (single-source) sound as well.

Your VCR also will record in Hi-Fi stereo or in second audio, so when you play back that tape on the VCR, it will be in stereo or second audio. If you play back the tape on a VCR that can’t play back tapes in stereo or second audio, the VCR will automatically play the tape in monaural sound.

Read the directions on this page to familiarize yourself with your VCR’s stereo and second audio setups. Then follow the directions on page 44 to record in stereo or second audio and the directions on page 45 to play back tapes recorded in Hi-Fi stereo.

Understanding On-Screen Displays

When you receive a signal from a channel you’re watching, portions of the on-screen display shown below will appear when you press the STATUS/EXIT button on the remote control.

The indication 2ND AUD or TV STEREO that appears on this side

of the status display tells you if your VCR is receiving a second audio or stereo broadcast.

Although a program may be broadcast in both stereo and second audio, you cannot record in both stereo and second audio at the same time.

STOP

 

12:00 AM

TV STEREO

CH 02

 

 

STEREO

 

 

2ND AUD

SLP

1:23:45

HIFI

The indication 2ND AUD or STEREO that appears on this side of the status display tells you if the program you’re watching is available in second audio or stereo. This indication is not available during tape playback.

Even though a program is available in stereo or second audio, you still must program the VCR to receive or record the program. Follow the direc- tions on page 44.

To record and play back programs broadcast in stereo, even if you have a Single Speaker TV, just use one of the connections shown, then follow the steps on pages 44-45.

Stereo Amplifier

or Receiver

R

L

 

 

 

AUDIO

ANT

 

 

L

IN

 

OUT

IN

 

 

 

R

 

 

VIDEO

OUT

Audio cables from

OUT IN

CH3 CH4

AUDIO OUT Jacks of

 

 

VCR to AUDIO IN Jacks

 

 

of Stereo Amplifier or

 

 

Receiver

 

 

SingleStereoMonitor

Speaker TV

Speaker TV

TV

OR

OR

Monaural Sound

RF coaxial cable (supplied) from VCR’s

OUT Jack to TV’s ANTENNA IN Jack

Video cable from VIDEO OUT Jack of VCR to VIDEO IN Jack of monitor TV

Image 43
Contents VR423CAT VR623CAT For Customer Use Dear Philips product ownerDeclaration of Conformity FeaturesSafety Precautions IntroductionTable of Contents Before Using Your VCR Disconnect the antenna or cable from your TV Hookups without a Cable Box/Direct Broadcast SystemHookups without a Cable Box/Direct Broadcast System cont’d Plug in the power cords of the TV and the VCRConnections Hookups with a Cable Box/Direct Broadcast SystemRecording/Viewing Any Channel Recording One Channel/Watching Another Hookups with a Cable Box/Direct Broadcast System cont’dVR623CAT Hookups with a Stereo TVTurning on Your VCR Press the VCR button, then press the Power buttonPress the VCR button Press the Menu button Automatic Channel SetupVR623CAT only Adding/Deleting Channels Automatic Channel Setup cont’dPress the STATUS/EXIT button once or twice to exit Reviewing Memorized ChannelsDo each step within 60 seconds of the previous step Manual Clock SettingSetting the Clock cont’d Press the VCR button, then press the Menu button Automatic Clock SettingTime Zone Daylight-Savings Time Audio OUT Language Blue Background To END Push Exit Language SelectionSetting the Remote to Operate a TV 2code Find your Cable BOX CodesCable Users VOLume o/p ButtonsEject Button Menu ButtonTV Button Remote Control Buttons cont’dIf you select Status OFF Status Display example onlyIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFFVCR Display Panel Video In Jack REWind Button Power ButtonFWD Fast Forward Button Remote SensorOUT Jack Rear PanelAudio OUT Jacks Video OUT JackVHS Quasi Play Back Sqpb PlayingOther recording options are on pages Recording3&7 OTR CH12 One-Touch RecordingDaily Set the clock. Details are on pagesTime OFF To Correct Push Clear To END Push Exit Timer Recording cont’dTape Speeds Press the STATUS/EXIT button. Program WAS COMChecking or Cancelling Timer Recordings RF coaxial cable Rerecording Tape DuplicationTurn on the TV and set it to channel 03 or 04, whichever Press the PLAY/o button or the STOP/p button to select Repeat PlayPress the F.FWD/B button so that on appears beside Real-Time Counter Memory Press the VCR button Press the Time Search button Time SearchViewing a Slow Motion Picture Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still PictureAutomatic Operation Features Understanding On-Screen Displays Multi-Channel Television Sound System VR623CAT onlyMulti-Channel Television Sound System VR623CAT only cont’d Please see additional notes on Hi-Fi Stereo Sound System VR623CAT onlyAudio OUT Language → Blue Background To END Push Exit Blue BackgroundCable Box/DBS Output Channel 03 or GlossaryHelpful Hints Helpful Hints cont’d Video Cassette Recorder or Player Limited WarrantyPayment, if applicable Limited Warranty cont’dTo obtain a replacement product from Philips Payment Amount $29.95 + Sales Tax = TotalSpecifications Automatic IndexPage Page Supplied Accessories