Q-Logic 59229-05 A, 9100 manual Node WWN 100000c0dd07e34e

Page 53

2–Planning Security

b.Create an ISL group (Group_ISL_1) in Security_Set_1 with Switch_1 and Switch_2 as members. The Switch_1 secret must be shared with the Switch_2 security database.

Switch_1

Switch_2

Node WWN: 10:00:00:c0:dd:07:e3:4c

Authentication: CHAP

Primary Hash: MD5

Primary Secret: 0123456789abcdef

Binding: None

Node WWN: 10:00:00:c0:dd:07:e3:4e

Authentication: CHAP

Primary Hash: MD5

Primary Secret: abcdef abcdef012

Binding: None

2.Configure security on HBA_1 using the appropriate management tool. Logins between the Switch_1 and HBA_1 will be challenged for their respective secrets. Therefore, the secrets for Switch_1 and HBA_1 that you configured on Switch_1 must also be configured on HBA_1.

3.Save and activate Security_Set_1 on Switch_1.

4.Create a security set (Security_Set_2) on Switch_2. Create an ISL group (Group_ISL_2) in Security_Set_2 with Switch_1 and Switch_2 as members. This is a replication of the entries in ISL group in the Switch_1 security database.

Switch_2

Switch_1

Node WWN: 10:00:00:c0:dd:07:e3:4c

Authentication: CHAP

Primary Hash: MD5

Primary Secret: 0123456789abcdef

Binding: None

Node WWN: 10:00:00:c0:dd:07:e3:4e

Authentication: CHAP

Primary Hash: MD5

Secret: abcdef abcdef012

Binding: None

5.Save and activate Security_Set_2 on Switch_2.

59229-05 A

2-17

Page 52 Page 54
Image 53
Page 52 Page 54
Contents QLogic 9000 Series Stackable Chassis Switch Document Revision History Table of Contents Planning Diagnostics/Troubleshooting InstallationCustomer Replaceable Units SpecificationsGlossary Index List of Figures List of Tables Intended Audience PrefaceRelated Materials Advertencias de seguridad Safety NoticesSicherheitshinweise Federal Communications Commission FCC Class a Statement Communications StatementsCE Statement Vcci Class a Statement Laser Safety InformationElectrostatic Discharge Sensitivity Esds Precautions Zugängliche Teile Accessible PartsPièces Accessibles New in this Release License AgreementsAvailability Technical SupportTraining Contact InformationPreface Technical Support Xviii 59229-05 a Hardware Overview QLogic 9000 Series Switch ModelsQLogic 9000 Series Switch Model Components Maintenance Panel Maintenance PanelBlades I/O Blades FC Port LEDs Blade LEDsPort Types Transceivers and 10-Gbps Stacking Cables CPU Blade CPU BladesCPU Blade LEDs Placing the Switch in Maintenance Mode Maintenance ButtonResetting a CPU Blade Ethernet Port Inter-Chassis Connection Ports Power Supply BladesSerial Port Power Supply Blade Fan Blade Fan BladesEnterprise Fabric Suite Fabric and Switch ManagementQuickTools Storage Management Initiative-Specification SMI-S Command Line InterfaceApplication Programming Interface Simple Network Management ProtocolDevices PlanningZoning Database Limits Device AccessDistance PerformanceExtended Credit Distances and Cable Lengths BandwidthPort-to-Port Latency Feature LicensingLatency Multiple Chassis Fabrics Optimizing Device Performance Single Switch Fabric with Initiators and TargetsDomain ID, Principal Priority, and Domain ID Lock Interconnecting QLogic 9000 Series Switches Switch Services Planning Switch Services User Account Security Internet Protocol SupportSecurity Connection Security IP SecurityPort Binding Device Security Security Example Switches and HBAs Security Example Switches and HBAs with AuthenticationHBA1 Node WWN 100000c0dd07e34e Security Example Radius Server Security Example Radius ServerPlanning Security HBA1 Save and activate SecuritySet2 on Switch2 Security Example Management Server Security Example Host AuthenticationPlanning Security Fabric Management Site Requirements InstallationFabric Management Workstation Switch Power RequirementsEnvironmental Conditions Management Workstation RequirementsQLogic 9000 Series Stackable Chassis Switch Installing a SwitchInstallation Installing a Switch Avertissement Mount the SwitchVorsicht ¡PRECAUCIÓN QLogic 9000 Series Rail Kit Warnung Installing an I/O Blade Install I/O BladesInstalling Stacking Cables Stack the SwitchesInstall Transceivers Power Up the Switch Warnung Attaching the Power Cord Restraint Bail Setting the Workstation IP Address for Ethernet Connections Configure the WorkstationConfiguring the Workstation Serial Port Obtain the Network Configuration Connect the Workstation to the SwitchInstall Enterprise Fabric Suite Start Enterprise Fabric Suite Network Configuration Parameters Configure the SwitchCable Devices to the Switch Installing Firmware Using QuickTools to Install Firmware Using Enterprise Fabric Suite 2007 to Install FirmwareOne-Step Firmware Installation Using the CLI to Install FirmwareEnter the password for your account name FTP only Custom Firmware Installation Adding a Switch to an Existing Fabric Installing Feature License Keys HyperStacking HyperStack Cable Connector Securing HyperStack Cables WWN Installation HyperStacking 59229-05 a Installation HyperStacking 59229-05 a Diagnostics/Troubleshooting Error Code Blink Patterns Power-On Self TestSystem Error Blink Pattern Fatal Post Error Blink PatternInternal Firmware Failure Blink Pattern Internal Firmware Failure Blink PatternConfiguration File System Error Blink Pattern QLogic $admin start CPU Blade Diagnostic Process CPU Blade DiagnosticsI/O Blade Diagnostic Process Blade DiagnosticsLogged-In LED FC Port DiagnosticsEPort Isolation Excessive Port Errors Diagnostics/Troubleshooting FC Port Diagnostics Transceiver Diagnostics Power Supply Blade Diagnostics Process Power Supply Blade DiagnosticsFan Blade Diagnostic Process Fan Blade DiagnosticsRecovering a Switch Using Maintenance Mode Unpacking a Firmware Image File Exiting the Maintenance MenuResetting User Accounts Resetting the Network ConfigurationRemoving the Switch Configuration Copying Log FilesRemaking the File System Resetting a BladeCustomer Replaceable Units QLogic 9000 Series Customer Replaceable Units Replacing Transceivers and Stacking Cables Replacing CPU Blades CPU blade heat sinks can become very hot. Handle with care Standard Single CPU Primary CPU Blade Replacement Removing the CPU0 Blade Customer Replaceable Units Replacing CPU Blades Standard Dual CPU Primary CPU Blade Replacement Fault Tolerant Primary CPU Blade Replacement Secondary CPU Blade Replacment Replacing I/O Blades Removing an I/O Blade Removing an I/O Blade Installing an I/O Blade Replacing Power Supply Blades Vorsicht ¡PRECAUCIÓN Removing a Power Supply Blade Removing a Power Supply BladeInstalling a Power Supply Blade Replacing Fan Blades Vorsicht Removing a Fan Blade Installing a Fan BladeCustomer Replaceable Units Replacing Fan Blades 59229-05 a Specifications Table A-1. Fabric Specifications Fabric SpecificationsOptional License Keys Table A-2. Optional License KeysTable A-3. Performance Features Performance FeaturesSpecifications Performance Features Table A-4. Modular Scalability Modular ScalabilityTable A-4. Modular Scalability Table A-6. Fabric Services Fabric ServicesInteroperability/Certifications Table A-5. Interoperability/CertificationsSpecifications Fabric Services Table A-7. Maintainability MaintainabilityTable A-8. Physical Characteristics Physical Characteristics 150 CFM air flow Table A-9. Electrical Requirements Electrical RequirementsTable A-10. Availalbe Power Cords Power Cord SpecificationsTable A-11. Environmental Factors Environmental FactorsTable A-12. Regulatory Certifications Regulatory CertificationsSpecifications Regulatory Certifications 59229-05 a Glossary CRU Fdmi SMI-S Vcci Page Index Index-2 59229-05 a 59229-05 a Index-3 LED 59229-05 a Index-5 Index-6 59229-05 a 59229-05 a Index-7 Page
Related manuals
Manual 2 pages 23.06 Kb

59229-05 A, 9100 specifications

The Q-Logic 9100,59229-05 A is a high-performance networking solution designed to empower data centers and enterprise environments with optimal connectivity and exceptional throughput. As an essential component in modern IT infrastructures, this product stands out due to its advanced feature set and robust technology.

One of the main features of the Q-Logic 9100,59229-05 A is its support for Fibre Channel technology, which is widely recognized for its reliability and speed in storage area networks (SANs). This networking solution facilitates seamless data transfer at high rates, significantly enhancing the performance of storage systems.

Another notable characteristic of the Q-Logic 9100,59229-05 A is its compatibility with various operating systems and virtualization platforms. This versatility allows organizations to integrate it easily into their existing infrastructure, ensuring a smooth transition and minimal downtime. The product also supports multiple protocols, enhancing its utility in diverse environments.

The Q-Logic 9100,59229-05 A employs cutting-edge technologies such as offload capabilities, which reduce CPU overhead, allowing servers to focus on critical applications. By offloading certain tasks from the server's main processor, this solution improves overall system performance and efficiency, aiding in quicker data processing and reduced latency.

Additionally, security features embedded within the Q-Logic 9100,59229-05 A help safeguard sensitive information as it traverses networks. It supports encryption and secure data transportation protocols, ensuring that corporate data remains protected against unauthorized access and breaches.

The adaptability of the Q-Logic 9100,59229-05 A is further exhibited through its support for multiple speeds, allowing organizations to choose the bandwidth that best fits their current needs while maintaining the potential for future upgrades as demands grow.

In conclusion, the Q-Logic 9100,59229-05 A not only excels in speed and performance but also offers a versatile and secure solution suitable for a wide range of data center applications. Its blend of advanced features, robust technology, and adaptability positions it as a valuable asset for organizations looking to enhance their network connectivity and storage capabilities in an increasingly data-driven world.
Top Page Image Contents