Q-Logic 9100, 59229-05 A manual Domain ID, Principal Priority, and Domain ID Lock

Page 44

2–Planning

Multiple Chassis Fabrics

Domain ID, Principal Priority, and Domain ID Lock

The following switch configuration settings affect multiple chassis fabrics:

Domain ID

Principal priority

Domain ID lock

The domain ID is a unique number from 1–239 that identifies each switch in a fabric. The principal priority is a number (1–255) that determines the principal switch which manages domain ID assignments for the fabric. The switch with the highest principal priority (1 is high, 255 is low) becomes the principal switch. If the principal priority is the same for all switches in a fabric, the switch with the lowest WWN becomes the principal switch.

The domain ID lock allows (False) or prevents (True) the reassignment of the domain ID on that switch. Switches come from the factory with the domain ID set to 1, the domain ID lock set to False, and the principal priority set to 254. Refer to the Set Config Switch command in the SANbox 9000 Series Stackable Chassis Switch Command Line Interface Guide for information about changing the default domain ID, domain ID lock, and principal priority parameters.

If you connect a new switch to an existing fabric with its domain ID unlocked, and a domain ID conflict occurs, the new switch will isolate as a separate fabric. However, you can remedy this by resetting the new switch or taking it offline then putting it back online. The principal switch will reassign the domain ID and the switch will join the fabric.

NOTE:

Domain ID reassignment is not reflected in zoning that is defined by domain ID/port number pair or Fibre Channel address. You must reconfigure zones that are affected by domain ID reassignment. To prevent zoning definitions from becoming invalid under these conditions, lock the domain IDs.

2-8

59229-05 A

Page 43 Page 45
Image 44
Page 43 Page 45
Contents QLogic 9000 Series Stackable Chassis Switch Document Revision History Table of Contents Planning Installation Diagnostics/TroubleshootingSpecifications Customer Replaceable UnitsGlossary Index List of Figures List of Tables Preface Intended AudienceRelated Materials Advertencias de seguridad Safety NoticesSicherheitshinweise Communications Statements Federal Communications Commission FCC Class a StatementCE Statement Vcci Class a Statement Laser Safety InformationElectrostatic Discharge Sensitivity Esds Precautions Zugängliche Teile Accessible PartsPièces Accessibles License Agreements New in this ReleaseTechnical Support AvailabilityTraining Contact InformationPreface Technical Support Xviii 59229-05 a QLogic 9000 Series Switch Models Hardware OverviewQLogic 9000 Series Switch Model Components Maintenance Panel Maintenance PanelBlades I/O Blades Blade LEDs FC Port LEDsPort Types Transceivers and 10-Gbps Stacking Cables CPU Blades CPU BladeCPU Blade LEDs Placing the Switch in Maintenance Mode Maintenance ButtonResetting a CPU Blade Ethernet Port Inter-Chassis Connection Ports Power Supply BladesSerial Port Power Supply Blade Fan Blades Fan BladeFabric and Switch Management Enterprise Fabric SuiteQuickTools Command Line Interface Storage Management Initiative-Specification SMI-SApplication Programming Interface Simple Network Management ProtocolPlanning DevicesDevice Access Zoning Database LimitsPerformance DistanceBandwidth Extended Credit Distances and Cable LengthsPort-to-Port Latency Feature LicensingLatency Multiple Chassis Fabrics Single Switch Fabric with Initiators and Targets Optimizing Device PerformanceDomain ID, Principal Priority, and Domain ID Lock Interconnecting QLogic 9000 Series Switches Switch Services Planning Switch Services User Account Security Internet Protocol SupportSecurity Connection Security IP SecurityPort Binding Device Security Security Example Switches and HBAs with Authentication Security Example Switches and HBAsHBA1 Node WWN 100000c0dd07e34e Security Example Radius Server Security Example Radius ServerPlanning Security HBA1 Save and activate SecuritySet2 on Switch2 Security Example Host Authentication Security Example Management ServerPlanning Security Fabric Management Installation Site RequirementsSwitch Power Requirements Fabric Management WorkstationEnvironmental Conditions Management Workstation RequirementsInstalling a Switch QLogic 9000 Series Stackable Chassis SwitchInstallation Installing a Switch Mount the Switch AvertissementVorsicht ¡PRECAUCIÓN QLogic 9000 Series Rail Kit Warnung Install I/O Blades Installing an I/O BladeStack the Switches Installing Stacking CablesInstall Transceivers Power Up the Switch Warnung Attaching the Power Cord Restraint Bail Configure the Workstation Setting the Workstation IP Address for Ethernet ConnectionsConfiguring the Workstation Serial Port Obtain the Network Configuration Connect the Workstation to the SwitchInstall Enterprise Fabric Suite Start Enterprise Fabric Suite Configure the Switch Network Configuration ParametersCable Devices to the Switch Installing Firmware Using Enterprise Fabric Suite 2007 to Install Firmware Using QuickTools to Install FirmwareUsing the CLI to Install Firmware One-Step Firmware InstallationEnter the password for your account name FTP only Custom Firmware Installation Adding a Switch to an Existing Fabric Installing Feature License Keys HyperStacking HyperStack Cable Connector Securing HyperStack Cables WWN Installation HyperStacking 59229-05 a Installation HyperStacking 59229-05 a Diagnostics/Troubleshooting Power-On Self Test Error Code Blink PatternsFatal Post Error Blink Pattern System Error Blink PatternInternal Firmware Failure Blink Pattern Internal Firmware Failure Blink PatternConfiguration File System Error Blink Pattern QLogic $admin start CPU Blade Diagnostics CPU Blade Diagnostic ProcessBlade Diagnostics I/O Blade Diagnostic ProcessFC Port Diagnostics Logged-In LEDEPort Isolation Excessive Port Errors Diagnostics/Troubleshooting FC Port Diagnostics Transceiver Diagnostics Power Supply Blade Diagnostics Power Supply Blade Diagnostics ProcessFan Blade Diagnostics Fan Blade Diagnostic ProcessRecovering a Switch Using Maintenance Mode Exiting the Maintenance Menu Unpacking a Firmware Image FileResetting the Network Configuration Resetting User AccountsRemoving the Switch Configuration Copying Log FilesResetting a Blade Remaking the File SystemCustomer Replaceable Units QLogic 9000 Series Customer Replaceable Units Replacing Transceivers and Stacking Cables Replacing CPU Blades CPU blade heat sinks can become very hot. Handle with care Standard Single CPU Primary CPU Blade Replacement Removing the CPU0 Blade Customer Replaceable Units Replacing CPU Blades Standard Dual CPU Primary CPU Blade Replacement Fault Tolerant Primary CPU Blade Replacement Secondary CPU Blade Replacment Replacing I/O Blades Removing an I/O Blade Removing an I/O Blade Installing an I/O Blade Replacing Power Supply Blades Vorsicht ¡PRECAUCIÓN Removing a Power Supply Blade Removing a Power Supply BladeInstalling a Power Supply Blade Replacing Fan Blades Vorsicht Installing a Fan Blade Removing a Fan BladeCustomer Replaceable Units Replacing Fan Blades 59229-05 a Specifications Fabric Specifications Table A-1. Fabric SpecificationsOptional License Keys Table A-2. Optional License KeysPerformance Features Table A-3. Performance FeaturesSpecifications Performance Features Modular Scalability Table A-4. Modular ScalabilityTable A-4. Modular Scalability Fabric Services Table A-6. Fabric ServicesInteroperability/Certifications Table A-5. Interoperability/CertificationsSpecifications Fabric Services Maintainability Table A-7. MaintainabilityPhysical Characteristics Table A-8. Physical Characteristics 150 CFM air flow Electrical Requirements Table A-9. Electrical RequirementsPower Cord Specifications Table A-10. Availalbe Power CordsEnvironmental Factors Table A-11. Environmental FactorsRegulatory Certifications Table A-12. Regulatory CertificationsSpecifications Regulatory Certifications 59229-05 a Glossary CRU Fdmi SMI-S Vcci Page Index Index-2 59229-05 a 59229-05 a Index-3 LED 59229-05 a Index-5 Index-6 59229-05 a 59229-05 a Index-7 Page
Related manuals
Manual 2 pages 23.06 Kb

59229-05 A, 9100 specifications

The Q-Logic 9100,59229-05 A is a high-performance networking solution designed to empower data centers and enterprise environments with optimal connectivity and exceptional throughput. As an essential component in modern IT infrastructures, this product stands out due to its advanced feature set and robust technology.

One of the main features of the Q-Logic 9100,59229-05 A is its support for Fibre Channel technology, which is widely recognized for its reliability and speed in storage area networks (SANs). This networking solution facilitates seamless data transfer at high rates, significantly enhancing the performance of storage systems.

Another notable characteristic of the Q-Logic 9100,59229-05 A is its compatibility with various operating systems and virtualization platforms. This versatility allows organizations to integrate it easily into their existing infrastructure, ensuring a smooth transition and minimal downtime. The product also supports multiple protocols, enhancing its utility in diverse environments.

The Q-Logic 9100,59229-05 A employs cutting-edge technologies such as offload capabilities, which reduce CPU overhead, allowing servers to focus on critical applications. By offloading certain tasks from the server's main processor, this solution improves overall system performance and efficiency, aiding in quicker data processing and reduced latency.

Additionally, security features embedded within the Q-Logic 9100,59229-05 A help safeguard sensitive information as it traverses networks. It supports encryption and secure data transportation protocols, ensuring that corporate data remains protected against unauthorized access and breaches.

The adaptability of the Q-Logic 9100,59229-05 A is further exhibited through its support for multiple speeds, allowing organizations to choose the bandwidth that best fits their current needs while maintaining the potential for future upgrades as demands grow.

In conclusion, the Q-Logic 9100,59229-05 A not only excels in speed and performance but also offers a versatile and secure solution suitable for a wide range of data center applications. Its blend of advanced features, robust technology, and adaptability positions it as a valuable asset for organizations looking to enhance their network connectivity and storage capabilities in an increasingly data-driven world.
Top Page Image Contents